Turning On The Camera - Kodak EasyShare DX4330 User Manual

Turning On the Camera

Ready light
Mode dial
DELETE
MENU
OK
Adjusting the Display
To
Turn Liveview on so that the LCD can
be used as a viewfinder
Change the Liveview setting so that it
is on whenever the camera is on
Turn the status bar back on after it
times out
Turn off the camera
Chapter 1
1
Share
2
REVI
EasyShare
Remove the lens cap.
If the lens cap is not removed, it comes
off automatically when you turn on the
camera.
Turn the Mode dial from Off to any other
position.
The ready light blinks green while the
camera performs a self-check.
When the ready light glows steady green,
the camera is ready to take pictures (or
videos, if the mode dial is set to
In Still and Video modes, a status bar
appears on the LCD.
Do This
Press the OK button. To turn it off,
press the OK button again.
See page 51.
Press
1 Turn the Mode dial to Off.
The camera completes
operations that are in process.
2 Replace the lens cap.
.
).
7