Kodak EasyShare DX4330 User Manual page 84

Camera
Problem
Picture is too dark. Flash is not on or did not
Picture is too light. The flash is not needed. Change to Auto flash
72
Chapter 10
Cause
function.
The subject is too far
away for the flash to have
an effect.
The subject is in front of
a bright light (backlit).
Lighting condition is too
dark.
The subject was too
close when the flash was
used.
The light sensor is
covered.
Lighting condition is too
bright.
Solution
Turn on the flash
Move so there is no more
than 11.2 ft (3.4 m) between
the camera and the subject;
6.6 ft (2.0 m) in Telephoto.
Use Fill flash (page
change your position so the
light is not behind the
subject.
Increase Exposure
Compensation (page
Long Time Exposure
(page 27).
(page 22).
Move so there is at least 2.0
ft (0.6 m) between the
camera and the subject.
Hold the camera so your
hands or other objects do
not cover the light sensor.
Decrease exposure
compensation (page
(page 22).
22) or
26) or
26).