Clock Settings; Main System Clock Setting - NEC V850/SV1 User Manual

2.2

Clock Settings

This section describes the clock settings.
For the position of the JP1 and JP2 in the IE-703040-MC-EM1, refer to Figure 2-1.
For the jumper switch position in the IE-703002-MC, refer to the IE-703002-MC User's Manual (U11595E).

2.2.1 Main system clock setting

Emulator Use Clock Supply Method
Environment
When using Internal clock
emulator as
standalone unit
When using Internal clock
emulator with
target system
Target clock
Note The target clock supports only an oscillator (X2 cannot be used because it is not connected in the
emulator).
Clock input by resonator is not supported.
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
Table 2-1. Main System Clock Setting
IE-703040-MC-EM1 Setting
JP1
1
1
1 2
Note
User's Manual U14337EJ1V0UM00
SW1 SW2
ON ON
2 3
3
2
3
IE-703002-MC Setting
JP2
7
8
1
2
21