Resetting The User Default Settings; Program Timeout - Sharp AJ-6110 Setup And Operation Manual

RESETTING THE USER DEFAULT SETTINGS

Press the "MENU" button, and repeatedly press the
1
"ARROW" buttons until "Feature Defaults" is shown on the first
line of the display panel.
Repeatedly press the
2
is shown on the second line of the display panel.
Press the "ENTER" button.
3
The settings saved as the user default settings will return to the values of the
factory default setting.
The following message will appear for one second after the "ENTER" button is
pressed. The unit will soon return to the ready state.

PROGRAM TIMEOUT

The following settings will return to the user default settings a specified time out period after
the last copying operation; "Paper Type", "Paper Size", "Colour Mode", "Copy Quality",
"Brightness", "Intensity", "Zoom" and "Original Type". Follow the steps shown below to set
the timeout period.
Press the "MENU" button, and repeatedly press the
1
"ARROW" buttons until "Program Timeout" is shown on the
first line of the display panel.
Repeatedly press the
2
desired value appears on the second line of the display panel.
Select from "1. 60 seconds" (Default setting), "2. 90 seconds", "3. 30 seconds",
"4. 15 seconds" and "5. None".
Press the "ENTER" button.
3
A checkmark (
selected value for one second, the display will return to the ready message.
Downloaded from: http://www.usersmanualguide.com/
4.Feature Defaults
1.Save new
or
4.Feature Defaults
2.Reset
Resetting feature
defaults...
5.Program Timeout
1.60 seconds
or
) will be added to show the selected setting. After displaying the
"ARROW" buttons until "Reset"
"ARROW" buttons until the
or
or
55