Brightness And Intensity Selections - Sharp AJ-6110 Setup And Operation Manual

BRIGHTNESS AND INTENSITY SELECTIONS

Setting brightness
Follow the steps shown below to make the image lighter or darker.
Press the "BRIGHTNESS/INTENSITY" button and repeatedly press
1
the
first line of the display panel.
Repeatedly press the
2
setting value is displayed on the second line of the display panel.
Select from "1. Lightest", "2. Lighter", "3. Normal" (Default setting), "4. Darker"
and "5. Darkest".
Press the "ENTER" button.
3
A checkmark (
selected value for one second, the display will return to the ready message.
Setting intensity (Colour copy mode only)
Follow the steps shown below to adjust the intensity of the image.
Press the "BRIGHTNESS/INTENSITY" button, and repeatedly press
1
the
first line of the display panel.
Repeatedly press the
2
setting value is displayed on the second line of the display panel.
Select from "1. Least Colour", "2. Less Colour", "3. Normal" (Default setting),
"4. More Colour" and "5. Most Colour".
Press the "ENTER" button.
3
A checkmark (
selected value for one second, the display will return to the ready message.
52
Downloaded from: http://www.usersmanualguide.com/
or "ARROW" buttons until "Brightness" is shown on the
1.Brightness
3.Normal
) will appear, indicating the selected value. After displaying the
1.Brightness
4.Darker
or "ARROW" buttons until "Intensity" is shown on the
2.Intensity
3.Normal
) will appear, indicating the selected value. After displaying the
2.Intensity
4.More Colour
or "ARROW" buttons until the desired
or "ARROW" buttons until the desired