Table of Contents
Advertisement
Cautions
Follow the cautions below when using this unit.
The unit is affected by the environment in which it is installed. Do not install your unit
in the following area.
−Dusty areas
If dust enters the interior of the unit, damage or poor-quality output can result.
−Areas in direct sunlight
Prolonged exposure to direct sunlight can cause distortion to some parts which
may result in poor quality output.
−Excessively hot, cold, humid, or dry areas (for example, near heaters, humidifiers,
or air conditioners) may result in damp paper, or condensation within the internal
mechanisms causing misfeeds, or dirty output.
Operating Conditions
Temperature : 10-35 degrees Celsius (50-95 degrees Fahrenheit)
Relative humidity : 20%-85%
Note : When the temperature reaches 30 degrees Celsius (86 degrees Fahrenheit),
The power outlet should be near the equipment, and should be easily accessible.
When moving the unit, be sure to first turn the power switch off, and then remove the
power cord from the outlet.
Place the unit on a firm, level surface.
Be sure to use genuine SHARP ink tanks.
If you get ink spots on your skin, wash with water as soon as possible.
Store spare ink tanks out of the reach of children.
For the disposal of the spent ink tank, pack it in a plastic bag.
Downloaded from:
http://www.usersmanualguide.com/
the relative humidity must be 60% or less.
Advertisement
Table of Contents
