Functions And Multi-Access - Sharp AR-215 Operation Manual

Second priority jobs
Print jobs, fax reception jobs.
Jobs processed simultaneously
Scanner transmission jobs, memory transmission jobs (memory transmission jobs cannot
be processed simultaneously with direct transmission jobs).
Notes
For example, if a fax is received during a copy job, the fax is not printed until the copy job
●
has been completed. (If the fax is urgent, it is possible to interrupt copying and print the fax.)
For example, if paper runs out during a print job, and a copy job, or scan job is stored, the
●
stored job begins unless the print job is a two-sided print job or print priority mode is
selected. For details, refer to "Operation when an error occurs".

Functions and Multi-Access

Functions and the operation panel
This machine has four modes: copy mode, print mode, scan mode, and fax mode. The mode can
be changed by pressing the appropriate mode key. Note that the number of modes supported
varies depending on the model.
The operation panel is divided into the two following areas. This illustration shows the operation
panel of models with the most installed features.
Fax area
The main area is used for copy, print, and scan modes.
●
The main area and the fax area is used for fax mode.
●
Note
The indications of the operation panel may differ depending on the country and the region.
●
Downloaded from: http://www.usersmanualguide.com/
1st priority group
Walkup jobs
Copy jobs (including electronic sort functions)
Fax scan jobs
Direct transmission jobs
Scan jobs
2nd priority group
Auto print jobs
Print jobs (including ROPM jobs)
Fax reception jobs
Transaction reports / activity reports
(including auto printing)
Simultaneous processing
Auto transmission jobs
Memory transmission jobs
Scanner transmission jobs
Main area
Multi-Access
2