Advertisement
Assembly procedure
① Select [Point 4] with the UP (▲) and DOWN (▼) switches and press the ENTER switch,
① Select [Point 4] with the UP (▲) and DOWN (▼) switches and press the ENTER switch,
① Select [Point 4] with the UP (▲) and DOWN (▼) switches and press the ENTER switch,
and the screen moves to the "Point 4" adjustment screen.
and the screen moves to the "Point 4" adjustment screen.
and the screen moves to the "Point 4" adjustment screen.
② While "Horizontal Adjustment" is selected, operate the Luminance control switch to adjust
② While "Horizontal Adjustment" is selected, operate the Luminance control switch to adjust
② While "Horizontal Adjustment" is selected, operate the Luminance control switch to adjust
the X coordinate of Point 4.
the X coordinate of Point 4.
the X coordinate of Point 4.
③ After adjusting the X-coordinate, press the ENTER switch to select "Vertical Adjustment".
③ After adjusting the X-coordinate, press the ENTER switch to select "Vertical Adjustment".
④ While "Vertical Adjustment" is selected, press the ENTER switch again to complete
④ While "Vertical Adjustment" is selected, press the ENTER switch again to complete
adjustment of point 4.
adjustment of point 4.
*As a rule, do not adjust the Y-coordinates of Point 3 and 4 since they do not need to be
*As a rule, do not adjust the Y-coordinates of Point 3 and 4 since they do not need to be
adjusted.
adjusted.
Precautions
Adjustment of rear view monitor guide line
NO.0080
position
Tools to be used
Name
Others
Others
38
Facilities to be used
Q'ty
Name
Q'ty
Advertisement
