Komatsu WA470-7 Assembly Instruction Manual page 24

Assembly procedure
④ Press the ENTER switch, and the work equipment EPC lever detent set screen appears.
④ Press the ENTER switch, and the work equipment EPC lever detent set screen appears. ④ Press the ENTER switch, and the work equipment EPC lever detent set screen appears.
Boom Raise Adjustment Boom Raise Adjustment Boom Raise Adjustment
0 0 0
0: Waiting
0: Waiting 0: Waiting
1: OK
1: OK 1: OK
2: NG 2: NG 2: NG
Boom Lower Adjustment Boom Lower Adjustment Boom Lower Adjustment
0 0 0
0: Waiting 0: Waiting 0: Waiting
1: OK 1: OK 1: OK
2: NG 2: NG 2: NG
Bucket Tilt Adjustment Bucket Tilt Adjustment Bucket Tilt Adjustment
0 0
0: Waiting
0: Waiting
1: OK
1: OK
2: NG 2: NG
Bucket Dump Adjustment Bucket Dump Adjustment
0 0
0: Waiting 0: Waiting
1: OK 1: OK
2: NG 2: NG
*After performing steps ① to ④ of this process, perform adjustment steps ⑤ and after in *After performing steps ① to ④ of this process, perform adjustment steps ⑤ and after in
"Adjustment of each EPC lever" on the following page. "Adjustment of each EPC lever" on the following page.
Precautions
Adjustment of work equipment EPC starting
NO.0060
current
SET SET SET SET SET SET
SET; Set
SET; Set SET; Set
Boom RAISE Boom RAISE Boom RAISE
SET SET SET
SET SET SET
SET; Set SET; Set SET; Set
Boom LOWER Boom LOWER Boom LOWER
SET SET
SET; Set
SET; Set
Bucket TILT
Bucket TILT
SET SET
SET; Set SET; Set
Bucket DUMP
Bucket DUMP
Tools to be used
Name
Others
21
Facilities to be used
Q'ty Name Q'ty