Assembly procedure
④ While "Vertical Adjustment" is selected, operate the Luminance control switch to adjust
④ While "Vertical Adjustment" is selected, operate the Luminance control switch to adjust
④ While "Vertical Adjustment" is selected, operate the Luminance control switch to adjust
the Y coordinate of Point 2.
the Y coordinate of Point 2.
the Y coordinate of Point 2.
⑤ After adjusting the Y-coordinate, push the ENTER switch to complete adjustment of Point 2.
⑤ After adjusting the Y-coordinate, push the ENTER switch to complete adjustment of Point 2.
⑤ After adjusting the Y-coordinate, push the ENTER switch to complete adjustment of Point 2.
1-2-3. Adjustment of point 3
1-2-3. Adjustment of point 3
1-2-3. Adjustment of point 3
Match point 3 with the line on the right side of the machine.
Match point 3 with the line on the right side of the machine.
Match point 3 with the line on the right side of the machine.
① Select [Point 3] with the UP (▲) and DOWN (▼) switches and push the ENTER switch,
① Select [Point 3] with the UP (▲) and DOWN (▼) switches and push the ENTER switch,
and the screen moves to the "Point 3" adjustment screen.
and the screen moves to the "Point 3" adjustment screen.
Precautions
Adjustment of rear view monitor guide line
NO.0080
position
1.5m
1.5m
1.5m
Tools to be used
Name
Others
Others
36
Facilities to be used
Q'ty
Name
Q'ty