Advertisement
Assembly procedure
1-2. Adjustment of boom angle (LOWER)
1-2. Adjustment of boom angle (LOWER)
1-2. Adjustment of boom angle (LOWER)
① Select [07 Boom Angle Sensor for EPC (Lower)] with the UP (▲) and DOWN (▼)
① Select [07 Boom Angle Sensor for EPC (Lower)] with the UP (▲) and DOWN (▼)
① Select [07 Boom Angle Sensor for EPC (Lower)] with the UP (▲) and DOWN (▼)
switches and press the ENTER switch, and the screen moves to the "Boom Angle Sensor
switches and press the ENTER switch, and the screen moves to the "Boom Angle Sensor
switches and press the ENTER switch, and the screen moves to the "Boom Angle Sensor
(Lower)" adjustment screen.
(Lower)" adjustment screen.
(Lower)" adjustment screen.
Boom Angle Sensor for EPC
Boom Angle Sensor for EPC
Boom Angle Sensor for EPC
0
0
0
0: Waiting
0: Waiting
0: Waiting
1: OK
1: OK
1: OK
2: NG
2: NG
2: NG
② Lower the boom to the lower limit (cylinder stroke end) and then press the ENTER switch.
② Lower the boom to the lower limit (cylinder stroke end) and then press the ENTER switch.
② Lower the boom to the lower limit (cylinder stroke end) and then press the ENTER switch.
③ When the display changes to "1", adjustment is completed.
③ When the display changes to "1", adjustment is completed.
③ When the display changes to "1", adjustment is completed.
④ Press the ENTER switch to finish the adjustment mode. If the RETURN switch is pressed
④ Press the ENTER switch to finish the adjustment mode. If the RETURN switch is pressed
④ Press the ENTER switch to finish the adjustment mode. If the RETURN switch is pressed
during adjustment, adjustment is finished even in the calibration process.
during adjustment, adjustment is finished even in the calibration process.
during adjustment, adjustment is finished even in the calibration process.
Boom Angle Sensor for EPC (lower)
Boom Angle Sensor for EPC (lower)
Boom Angle Sensor for EPC (lower)
1
1
0: Waiting
0: Waiting
1: OK
1: OK
2: NG
2: NG
⑤ If the display changes to "2", the boom angle voltage is out of specification and
⑤ If the display changes to "2", the boom angle voltage is out of specification and
adjustment is not performed.
adjustment is not performed.
Boom Angle Sensor for EPC (lower)
Boom Angle Sensor for EPC (lower)
1
1
0: Waiting
0: Waiting
1: OK
1: OK
2: NG
2: NG
Precautions
Adjustment of work equipment controller boom
NO.0040
angle
SET
SET
SET
SET; Set
SET; Set
SET; Set
Tools to be used
Name
Others
13
Facilities to be used
Q'ty
Name
Q'ty
Advertisement
