Advertisement
Assembly procedure
1. Adjustment of boom angle
1. Adjustment of boom angle
1. Adjustment of boom angle
Adjust the work equipment controller boom angle according to the following procedure.
Adjust the work equipment controller boom angle according to the following procedure.
Adjust the work equipment controller boom angle according to the following procedure.
While [01 Monitoring / Pre-defined] is selected in the "Service Menu", select [09 Adjustment]
While [01 Monitoring / Pre-defined] is selected in the "Service Menu", select [09 Adjustment]
While [01 Monitoring / Pre-defined] is selected in the "Service Menu", select [09 Adjustment]
with the UP (▲) and DOWN (▼) switches.
with the UP (▲) and DOWN (▼) switches.
with the UP (▲) and DOWN (▼) switches.
(For how to enter the service menu, see No. 0010 "Setting of machine monitor".)
(For how to enter the service menu, see No. 0010 "Setting of machine monitor".)
(For how to enter the service menu, see No. 0010 "Setting of machine monitor".)
Press the ENTER switch, and the screen moves to the "Adjustment" screen.
Press the ENTER switch, and the screen moves to the "Adjustment" screen.
Press the ENTER switch, and the screen moves to the "Adjustment" screen.
1-1. Adjustment of Boom angle (RAISE)
1-1. Adjustment of Boom angle (RAISE)
① Select [06 Boom Angle Sensor for EPC (Raise)] with the UP (▲) and DOWN (▼)
① Select [06 Boom Angle Sensor for EPC (Raise)] with the UP (▲) and DOWN (▼)
switches and press the ENTER switch, and the screen moves to the "Boom Angle Sensor
switches and press the ENTER switch, and the screen moves to the "Boom Angle Sensor
(Raise)" adjustment screen.
(Raise)" adjustment screen.
Boom Angle Sensor for EPC (Raise)
Boom Angle Sensor for EPC (Raise)
0
0
0: Waiting
0: Waiting
1: OK
1: OK
2: NG
2: NG
Precautions
Adjustment of work equipment controller boom
NO.0040
angle
SET
SET
SET; Set
SET; Set
Tools to be used
Name
Others
Others
11
Facilities to be used
Q'ty
Name
Q'ty
Advertisement
