Advertisement
Assembly procedure
⑥ If adjustment is not performed, check the boom angle sensor by "monitoring".
⑥ If adjustment is not performed, check the boom angle sensor by "monitoring".
⑥ If adjustment is not performed, check the boom angle sensor by "monitoring".
⑦ Adjust the boom angle sensor installation position so that the voltage displayed by
⑦ Adjust the boom angle sensor installation position so that the voltage displayed by
⑦ Adjust the boom angle sensor installation position so that the voltage displayed by
monitoring is in the following range, and then adjust the angle sensor again.
monitoring is in the following range, and then adjust the angle sensor again.
monitoring is in the following range, and then adjust the angle sensor again.
Boom
Boom
Boom
specification
specification
specification
STD
STD
STD
Hi Lift
Hi Lift
Hi Lift
Precautions
NO.0040
Boom position
Boom position
Boom position
Voltage range
Voltage range
Voltage range
Lowest
Lowest
Lowest
1.38 ± 0.3 V
1.38 ± 0.3 V
1.38 ± 0.3 V
1.49 ± 0.3 V
1.49 ± 0.3 V
1.49 ± 0.3 V
Others
Adjustment of work equipment controller boom
angle
Tools to be used
Name
Q'ty
14
Facilities to be used
Name
Q'ty
Advertisement
