Advertisement
Assembly procedure
② While "Horizontal Adjustment" is selected, operate the Luminance control switch to adjust
② While "Horizontal Adjustment" is selected, operate the Luminance control switch to adjust
② While "Horizontal Adjustment" is selected, operate the Luminance control switch to adjust
the X coordinate of Point 3.
the X coordinate of Point 3.
the X coordinate of Point 3.
③ After adjusting the X-coordinate, push the ENTER switch to select "Vertical Adjustment".
③ After adjusting the X-coordinate, push the ENTER switch to select "Vertical Adjustment".
③ After adjusting the X-coordinate, push the ENTER switch to select "Vertical Adjustment".
④ While "Vertical Adjustment" is selected, push the ENTER switch again to complete
④ While "Vertical Adjustment" is selected, push the ENTER switch again to complete
④ While "Vertical Adjustment" is selected, push the ENTER switch again to complete
adjustment of point 3.
adjustment of point 3.
*As a rule, do not adjust the Y-coordinates of Point 3 and 4 since they do not need to be
*As a rule, do not adjust the Y-coordinates of Point 3 and 4 since they do not need to be
adjusted.
adjusted.
1-2-4. Adjustment of point 4
1-2-4. Adjustment of point 4
Match point 4 with the line on the left side of the machine.
Match point 4 with the line on the left side of the machine.
Precautions
Adjustment of rear view monitor guide line
NO.0080
position
1.5m
1.5m
Tools to be used
Name
Others
Others
37
Facilities to be used
Q'ty
Name
Q'ty
Advertisement
