Advertisement
Assembly procedure
1. Adjustment of work equipment EPC starting current
1. Adjustment of work equipment EPC starting current
1. Adjustment of work equipment EPC starting current
1-1. Check of items
1-1. Check of items
1-1. Check of items
*Perform the following correction while the engine is running.
*Perform the following correction while the engine is running.
*Perform the following correction while the engine is running.
① While [01 Monitoring / Pre-defined] is selected in the service menu, select [09 Adjustment]
① While [01 Monitoring / Pre-defined] is selected in the service menu, select [09 Adjustment]
① While [01 Monitoring / Pre-defined] is selected in the service menu, select [09 Adjustment]
with the UP (▲) and DOWN (▼) switches.
with the UP (▲) and DOWN (▼) switches.
with the UP (▲) and DOWN (▼) switches.
(For how to enter the service menu, see No. 0010 "Setting of machine monitor".)
(For how to enter the service menu, see No. 0010 "Setting of machine monitor".)
(For how to enter the service menu, see No. 0010 "Setting of machine monitor".)
② Push the ENTER switch, and the screen moves to the "Adjustment" screen.
② Push the ENTER switch, and the screen moves to the "Adjustment" screen.
② Push the ENTER switch, and the screen moves to the "Adjustment" screen.
③ Select a work equipment EPC adjustment item from adjustment items No. 08 to No. 10
③ Select a work equipment EPC adjustment item from adjustment items No. 08 to No. 10
with the UP (▲) and DOWN (▼) switches.
with the UP (▲) and DOWN (▼) switches.
Boom RAISE ：No.08
Boom RAISE ：No.08
Boom LOWER ：No.09
Boom LOWER ：No.09
Bucket TILT ：No.10
Bucket TILT ：No.10
Bucket DUMP ：No.11
Bucket DUMP ：No.11
Precautions
Adjustment of work equipment EPC starting
NO.0060
current
* Respective items must be set up
* Respective items must be set up
independently
independently
Tools to be used
Name
Others
20
Boom RAISE
Boom RAISE
Boom LOWER
Boom LOWER
Bucket TILT
Bucket TILT
Bucket DUMP
Bucket DUMP
Facilities to be used
Q'ty
Name
Q'ty
Advertisement
