Advertisement
Assembly procedure
1-2-1. Adjustment of point 1
1-2-1. Adjustment of point 1
1-2-1. Adjustment of point 1
Match point 1 with the right mark at 1.5 m rear from the machine.
Match point 1 with the right mark at 1.5 m rear from the machine.
Match point 1 with the right mark at 1.5 m rear from the machine.
① Select [Point 1] with the UP (▲) and DOWN (▼) switches and push the ENTER switch,
① Select [Point 1] with the UP (▲) and DOWN (▼) switches and push the ENTER switch,
① Select [Point 1] with the UP (▲) and DOWN (▼) switches and push the ENTER switch,
and the screen moves to the "Point 1" adjustment screen.
and the screen moves to the "Point 1" adjustment screen.
and the screen moves to the "Point 1" adjustment screen.
② While "Horizontal Adjustment" is selected, operate the Luminance control switch to
② While "Horizontal Adjustment" is selected, operate the Luminance control switch to
adjust the X coordinate of Point 1.
adjust the X coordinate of Point 1.
Precautions
Adjustment of rear view monitor guide line
NO.0080
position
1.5m
1.5m
1.5m
* The screen of this photo is black, but the rear view is
* The screen of this photo is black, but the rear view is
displayed during actual adjustment.
displayed during actual adjustment.
Tools to be used
Name
Others
Others
33
Facilities to be used
Q'ty
Name
Q'ty
Advertisement
