Assembly procedure
③ After adjusting the X-coordinate, push the ENTER switch to select "Vertical Adjustment".
③ After adjusting the X-coordinate, push the ENTER switch to select "Vertical Adjustment".
③ After adjusting the X-coordinate, push the ENTER switch to select "Vertical Adjustment".
④ While "Vertical Adjustment" is selected, operate the Luminance control switch to adjust
④ While "Vertical Adjustment" is selected, operate the Luminance control switch to adjust
④ While "Vertical Adjustment" is selected, operate the Luminance control switch to adjust
the Y coordinate of Point 1.
the Y coordinate of Point 1.
the Y coordinate of Point 1.
⑤ After adjusting the Y-coordinate, push the ENTER switch to complete adjustment of Point 1.
⑤ After adjusting the Y-coordinate, push the ENTER switch to complete adjustment of Point 1.
⑤ After adjusting the Y-coordinate, push the ENTER switch to complete adjustment of Point 1.
1-2-2. Adjustment of point 2
1-2-2. Adjustment of point 2
Match point 2 with the left mark at 1.5 m rear from the machine.
Match point 2 with the left mark at 1.5 m rear from the machine.
Precautions
Adjustment of rear view monitor guide line
NO.0080
position
1.5m
1.5m
Tools to be used
Name
Others
Others
34
Facilities to be used
Q'ty
Name
Q'ty