Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
(c) The SCDU can display a large and small font size. Different character fonts are
not shown in the example SCDU page figures given in this section. The use of
large font is indicated by the presence of uppercase letters in the SCDU page
figures, while the use of small fonts are demonstrated by lowercase letters. In
general, page names displayed in the title line are in large font. For pages where
p/t is specified to be displayed in the title line, the p/t is in small font. Data
entered into the scratchpad is displayed in large font. Data in the label lines is
displayed in small font, while data in the data lines is displayed in large font.
Numerical character font sizes cannot be shown in the figures, but their font
sizes follow the same conventions.
LS Keys
1L -- 1R
2L -- 2R
3L -- 3R
4L -- 4R
5L -- 5R
6L -- 6R
(d) Labels on the left side of the SCDU display are displayed beginning in column 2
of the label line. Data on the left side is left-justified in the data line. Labels and
data on the right side of the SCDU display is right-justified. This is the case
unless specified otherwise.
(2) Scratchpad
(a) General
1
The scratchpad is used for data entry and displaying SDU generated
messages. Pushing an alphanumeric key on the keypad (0 through 9, A
through Z, +/-- [plus or minus], / [slash, space]) enters that character into the
scratchpad. The scratchpad is not used for fixed format display purposes.
The mechanism used for data entry is described below.
Honeywell International Inc. Do not copy without express permission of Honeywell.
MCS--4200/7200 Multi--Channel SATCOM System
Table 6-8. LS Key/Line Pair Relations
Display Lines
2 and 3
4 and 5
6 and 7
8 and 9
10 and 11
12 and 13
23- -20- -35
Page 6--22
15 Jul 2006
Advertisement
