Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
MCS--4200/7200 Multi--Channel SATCOM System
Figure 6-8 (Sheet 9). Configuration Data
c
Lines 8 and 9
(1) These lines display X(0)* or X(1)* left-justified as shown in the
figure, where X represents C and D, respectively. X(0)* or X(1)* are
determined by the state of system configuration pins TP13C and
TP13D. Asterisks are displayed in column 5 to indicate these pins
are a coded group.
(2) Beginning in column 6, a textual message is shown in line 8 and
according to Table 6-13, where an x indicates the message to be
displayed, based on the state of system configuration pins TP13C
and TP13D.
d
Line 12
(1) This line displays E(0) SCDU3 INSTALLED or E(1) SCDU3 NOT
INSTALLED left-justified as determined by the state of system
configuration pin TP13E.
Honeywell International Inc. Do not copy without express permission of Honeywell.
23- -20- -35
Page 6--56
15 Jul 2006
Advertisement
