Download Print this page

Honeywell THALES MCS-4200 Installation And Maintenance Manual page 151

Multi-channel satcom system

Advertisement

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
MCS--4200/7200 Multi--Channel SATCOM System
(3) CMC Interactive Mode
(a) The SDU supports configuration data in CMC interactive mode for a Boeing 777
installation. If the CMC transmits a configuration data interactive mode command
addressed to the SDU on ARINC label 227, the SDU processes the command by
supplying the first page of configuration information and then resumes automatic
mode processing. The configuration data command is used to display
configuration information for the SATCOM LRUs (SDU and HPAs). The SDU
responds to the configuration data command from the automatic mode.
(b) The SDU does not support ground test and shop faults in CMC interactive mode.
If the CMC transmits a ground test or shop faults interactive mode command
addressed to the SDU on label 227, the SDU ignores the command.
(4) Configuration Data Messages
(a) General
1
When configuration data is commanded, the MCS configuration data
page(s) is(are) displayed. These data pages display installed LRUs as
determined by the SDU system configuration pin settings with their
associated part/serial number data. These lines also display the ORT
identification along with modification status. Figure 6-17 supplies an
example of the configuration data page.
2
The ORT 24-character description as contained in ORT item xxxiii is
displayed. For non-777 installations, the text is limited to 20 characters per
line.
(b) USER ORT STATUS
1
This displays MODIFIED if the state of the ORT user partition is modified,
otherwise no status or header is displayed.
(c) SECD ORT IDENTIFICATION
1
This is the 24-character description as contained in ORT item liii. For
non-777 installations, the text is limited to 20 characters per line.
(d) SECURED ORT STATUS
1
This displays MODIFIED if the state of the ORT secured partition is modified,
otherwise, no status or header is displayed. For software package C3.5, the
ORT is not partitioned so only a single ORT IDENTIFICATION is supplied for
the ORT display lines.
 Honeywell International Inc. Do not copy without express permission of Honeywell.
23- -20- -35
Page 6--91
15 Jul 2006

Advertisement

loading

This manual is also suitable for:

Thales mcs-7200