Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
MCS--4200/7200 Multi--Channel SATCOM System
g
Line 9
(1) This line displays RATIO(R/F) beginning in column 1. The HGA
HPA reflected power to forward power ratio is displayed (if
configured) right-justified in column 17 (as determined from the
HGA HPA). The LGA HPA reflected power to forward power ratio is
displayed (if configured) right-justified in column 24 (as determined
from the LGA HPA). The allowable range for the display of the
reflected power to forward power ratio is 0.000 to 1.000 Watts. If the
reported ratio is over-range, the text OVER is displayed. If the ratio
number is unavailable, dashes are displayed.
NOTE: The over-range condition occurs when the forward power
h
Line 10
(1) This line displays CARRIER beginning in column 1.
i
Line 11
(1) This line displays COMMANDED beginning in column 1. The HGA
HPA commanded carrier state is displayed (if configured)
right-justified in column 17 (as determined from the HGA HPA). The
LGA HPA commanded carrier state is displayed (if configured)
right-justified in column 24 (as determined from the LGA HPA). The
commanded carrier state is displayed as either ON or OFF.
j
Line 12
(1) This line displays ACTUAL beginning in column 1. The HGA HPA
actual carrier state is displayed (if configured) right-justified in
column 17 (as determined from the HGA HPA). The LGA HPA
commanded carrier state is displayed (if configured) right-justified in
column 24 (as determined from the LGA HPA). The actual carrier
state is displayed as either ON or OFF.
k
Line 13
(1) This line displays RETURN> right-justified. Pushing LS key 6L
causes the page display to revert to the SAT--N (SATCOM
MAINTENANCE) page.
Honeywell International Inc. Do not copy without express permission of Honeywell.
is more than 50 Watts while the reflected power is at the
maximum of 25.056 Watts. The HPA indicates the
over-range condition through the solo word ratio value of
FF
H.
23- -20- -35
Page 6--65
15 Jul 2006
Advertisement
