Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
MCS--4200/7200 Multi--Channel SATCOM System
b
When the START prompt is selected by pushing the 5L key when the
data loader status is READY:
• Periodic data logging starts
• The asterisk next to START is removed
• The <SEL> message is displayed beginning in column 8
• STOP is displayed adjacent to the 5R key.
c
Periodic data logging continues until the 5R key is pushed, at that time
the data line display reverts to its original state (i.e., only the START
prompt with or without an asterisk as appropriate).
d
The <SEL> message remains displayed and the STOP prompt is
blanked if the data loader status changes to ERROR after periodic data
logging has started. This condition remains until the error is
acknowledged by pushing the 6L key and/or the data loader status
changes, at that time the data line display changes as appropriate.
4
Field 6L
a
6L -- This data line displays the *ACK ERROR prompt. This prompt is
displayed when the data loader status is ERROR. Pushing the 6L key
causes the SDU to remove the ERROR status and display the current
data loader status (i.e., NOT CONNECTED or CONNECTED) in the 1L
data line.
b
The SDU completes the upload/download data transfer by commanding
the data loader transfer complete function. The data loader responds
with a TRANSFER COMPLETE indication and enters a no loop. To
return the data loader to the READY state, the user must cause the
data loader to read the configuration file on the diskette (i.e., cycle data
loader power or remove/insert the diskette).
5
Field 6R
a
6R -- This data line displays the RETURN> prompt. Pushing the 6R key
causes the display to revert to the SATCOM SUBMENU page (or
SATCOM MAINTENANCE page) as appropriate.
(8) LAST LEG REPORT Page
(a) Access to this page is from the SAT--N (i.e., SATCOM MAINTENANCE) page.
The purpose of this page is to display Class 1 and 2, Level 1 diagnosed, failures
reported during the last leg. See Figure 6-10 for example pages.
Honeywell International Inc. Do not copy without express permission of Honeywell.
23- -20- -35
Page 6--71
15 Jul 2006
Advertisement
