Omcan BE-IT-710-CSS Instruction Manual page 7

particular (but not only) of the components for transmitting motion to the sheeting rollers, drive and belt
guide cylinders.
- The motion transmission components are segregated by means of guards.
- Confluence zones of movement between the belts and transmission rollers are protected by the fixed
guards.
The structural parts (shoulders) and guards, along with the bottom of the flour tray housing seat, act
as fixed guards and make it impossible to reach the sheeting rollers from the sides and from above
respectively.
3. Emergency stop button; when this is pressed (only to be done in cases of real necessity and never for
stopping the machine in normal conditions) all the parts in movement are stopped and electric power to
the motor is disconnected. To restart the machine it is first necessary to reset the button (by turning it in the
direction indicated by the arrow on the head), and then press the enabling button.
OPENING/REMOVING THE GUARDS AND/OR DEACTIVATING THE SAFETY DEVICES IS ABSOLUTELY
FORBIDDEN.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as
possible.
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
1 YEAR PARTS AND LABOUR WARRANTY
Safety and Warranty
7