Honeywell CIPer 50 User Manual page 41

In Control Panel \ Network and Internet \ Network Connections.
In Control Panel \ Device Manager \ Network Adapters
If the driver has still not been successfully installed, do the following:
7. Right-click on the driver in the Network adapters folder in the Device Manager, and then click
Update Driver Software.
8. Click Browse my computer for driver software.
9. Click Let Me Pick from a list of device drivers on my computer.
10. Click Have Disk.
11. Click Browse and navigate to the folder <drive:>\CARE\drivers.
12. Depending on your Windows operating system type (32 bit or 64 bit), select the RNDIS USB driver
(32Bit) or the RNDIS USB driver (64Bit) file, and then click Open.
CIPer
TM
41
MODEL 50 CONTROLLER – USER GUIDE
31-00198-03