Appendix; Usb Driver Installation For Windows 7 - Honeywell CIPer 50 User Manual
Hide thumbs
Also See for CIPer 50:
- Installation & commissioning instructions (51 pages) ,
- User manual (44 pages) ,
- Installation & commissioning instructions (85 pages)
Table of Contents
Advertisement
CIPer
MODEL 50 CONTROLLER – USER GUIDE
TM
Appendix
USB Driver Installation for Windows 7
1.
Insert the A Male connector of the USB cable into an USB interface jack of the PC and insert the B
Male connector into the controller´s USB device interface jack.
RESULT: The Found New Hardware Wizard is enabled in the Windows Task Line.
2.
In the Windows Task Line, double-click the icon.
RESULT: The Driver Software Installation message box displays.
3.
If no RNDIS/Ethernet Gadget driver was found as indicated by the message ´X No driver found`,
click the Change setting... button.
RESULT: The Device Installation Settings dialog box displays.
4.
Select No, let me choose what to do, and then select Install driver software from Windows Update
if it is not found on my computer.
5.
Click the Save Changes button.
RESULT: Software tries to install the RNDIS/Ethernet Gadget driver. If the driver is successfully
installed, it can be seen in the following locations within Windows (see figures below):
6.
In Control Panel\Hardware and Sound \ Devices and Printers.
31-00198-03
40
Advertisement
Table of Contents
