Stiga SV 213 E Operator's Manual page 47

material will be recycled.
– When decommissioning, do not pollute the environment
with the machine, hand it over to a disposal centre, in ac-
cordance with the local regulations in force.
6. DIAGNOSTICS
What to do when ...
Source of problem
1. The machine does not work
Electric current does not reach
the machine
2. The current cuts off when the machine is started
The mains socket amperage is
not sufficient
Other electrical appliances are
working
3. The machine stops during work
The protection device triggers
4. The machine stops frequently during work or it does not
operate in a regular manner
Demanding working conditions
The working rotor is clogged
The grass-catcher is clogged
5. Poor and unsatisfactory performance levels
Working rotor with worn or miss-
ing blades or springs
Grass too tall
Ground too wet
For any doubts or problems, please do not hesitate to con-
tact your nearest Customer Service Centre or Your Dealer.
Corrective action
Check the electrical connection
Connect the machine to a mains
socket with sufficient amperage
Do not connect other appliances
to the same mains socket at the
same time
Wait at least 5 minutes before
restarting the motor
Check that the working rotor has
been regulated accordingly with
the conditions of the lawn and/or
regulate it to a higher level
Unplug the machine from the
mains, put on protective gloves
and clean the working rotor and
surrounding area
Reduce the quantity of removed
material reducing the depth of the
working rotor.
Empty the grass-catcher regularly
before it fills completely
Replace the working rotor with an
original part
Cut the grass to an adequate
height
Regulate the working rotor to a
higher level or postpone work
until ground conditions improve
5