Related Manuals for Stiga SILEX 95 B
Summary of Contents for Stiga SILEX 95 B
- Page 1 Operating Instructions Rotary Tiller SILEX 95 B MOTOR-CULTIVATOR MOTOCULTEUR MEHRZWECKGERÄT МОТОКУЛЬТИВАТОР...
- Page 2 Double Blade Scythe 87cm Rear Mounted Rotovator (Rotary tiller, Cultivator) 50cm...
- Page 6 Read the instructions manual before operating Danger tiller rotation Label accelerator Speed clutching Danger : rotation blade Attention: danger rotation lame...
- Page 7 Model Manufacturer Type Speed index Year of construction Serial number - Progressive Power in kW Masse Cutter bar clutching...
- Page 8 Introduction List of contents Dear customer, Thank you for your confidence in purchasing our products. We wish you to enjoy using our machines. Introduction The following working instructions have been issued to ensure a reliable running from the beginning. If you carefully follow such imformation the machine will operate with complete satisfaction and have a long service life.
- Page 9 5. For better protection, wear technical boots or shoes when working. DANGER! When the machine is operating the risk of serious injury to hands or feet is high. 6. When running the machine on its set of wheels on a path, switch off the motor and wait until the cultivator blades stop. 7.
- Page 10 HOW TO MOUNT THE ACCELERATOR WIRE (provided with metal sheath) Fig. 3 Position the lever (fig. 3, item 1) on the engine at the end of its stroke as shown by arrow “A “ in the figure. Move the throttle lever(2) on the handlebar to the end of its stroke as shown by arrow “B “...
- Page 11 side adjusted so that the operator can use the machine without treading in the soft ground or damaging the crop. HANDLEBAR SIDE ADJUSTMENT (Fig. 2) There are three positions for the handlebar side adjustment and these can be used either with rear-mounted attachments such as a cultivator or with front-mounted attachments such as a mower.
- Page 12 ATTACHMENT COUPLE (Fig. 14) After use, clean and grease the couple (2) through the grease nipple (1). CUTTER BAR MAINTENANCE The cutter bar requires good and frequent maintenance. A first and essential operation is to wash and clean the knife after each use. When the machine will not be used for long periods of time, the cutting bar and knife should be protected with corrosion inhibiting products and antioxidants.
- Page 13 TECHNICAL DETAILS ROTARY CULTIVATOR WITH MOWER ROTARY CULTIVATOR WITH CULTIVATOR Mowing width 870 mm Cultivating width 500 mm Mower bar length 1500 mm Max. length with cultivator 1400 mm Height 1000 mm Height 1000 mm Mass 65 Kg. Mass 78 Kg. Track 430 mm Track...