Advertisement
1.5.2 Battery Installation
Please follow the instructions in
1.5.3 Sensor calibration and configuration
The LoRaWAN AG Tilt sensor is pre-calibrated at the factory. There is no need to re-calibrate it at the field.
1.5.4 Sensor mounting on wall or pole
Please follow
this
link.
2. Maintenance
2.1 Troubleshooting
Problems with LoRaWAN communication like not receiving the packets...please refer to
troubleshoot the device.
Problems with the sensor functions like not measuring or inaccurate measuring....please refer to
troubleshoot the sensor part.
this
link.
this link
to
this link
to
Advertisement
