daviteq WSLRW-AG Series Manual page 5

2.2 Sensor maintenance
2.2.1 Maintenance of Wireless transmitter
Maintenance works
Consumable parts replacement
Cleaning device
Re-calibration / Re-validation
2.2.2 Maintenance of the AG Tilt sensor
Please refer to this link.
3. Advanced Guide
3.1 Operating principle of LoRaWAN AG Tilt Sensor
3.1.1 Operating principle of the complete device
The Daviteq LoRaWAN AG Tilt Sensor comprises 02 parts linked internally:
- The Daviteq LoRaWAN wireless transmitter;
- The Daviteq AG tilt sensor;
The AG Tilt sensor module measures the Acceleration of the 3-axis.
Yes/No
The battery is the only part need to check the
Yes lifetime to replace. Check the battery status on
the back-end system.
No
No calibration is required for the wireless
No
transmitter.
Descriptions