Cycle Length - heat-timer Genesis Installation And Operation Manual

When the outdoor temperature drops below the cutoff, the Genesis Heat-Timer
cycle. After the heating system is active, the heating system sensor will register when heat has reached throughout the building.
The combined effect of the outdoor and heating sensors is to provide an even, comfortable level of heat throughout the building.
Establish Heat
8 Minutes
Establish Heat
FIGURE 2
EXAMPLE CYCLES BASED ON WEATHER CONDITIONS

CYCLE LENGTH

The duration of the Cycle-ON period (when the heat source is activated) depends on four factors:
• Outdoor temperature
• Outdoor start temperature
• Heat Adjustment setting
• Cycle length
When the outdoor temperature is above the Outdoor start, the Genesis Heat-Timer
temperature is below the Outdoor start, the length of the Cycle-ON segment is adjusted by the Day and Night Heat Adjustment
settings. "1" is the shortest heat duration, "16" is the longest duration.
059705–00 REV. B
SAMPLE MILD WEATHER CYCLE
Cycle-On
Cycle-On
21 Minutes
SAMPLE COLD WEATHER CYCLE
® will automatically begin controlling the heating
Cycle-Off
52 Minutes
Cycle Length 60 Minutes
® will not call for heat. When the outdoor
03 STEAM HEATING
Cycle-Off
39 Minutes
HEAT-TIMER CORP.
|
11