Watchguard AP332CR Hardware Manual page 14

LED Color Status
Device cannot
Flashing Red
connect to
or Orange
WatchGuard
Cloud
Solid Blue Successfully
connected to
WatchGuard
Cloud
Flash LED
Flashing Blue
action from
WatchGuard
Cloud
Current factory default access points ship with firmware version 1.1.4-0 or lower.
WatchGuard Technologies, Inc.
Troubleshooting
This can occur for several reasons, for example:
Device did not receive an IP address from DHCP
n
Device cannot connect to *.watchguard.com or
n
*.watchguard.io because of a network issue or blocked
port
Use the access point command line interface (CLI) to run
network connectivity diagnostic tests. For more information,
see Access Point Command Line
Device is online and connected to WatchGuard Cloud.
LED flashes blue for 60 seconds for identification.
WatchGuard AP332CR Hardware Guide
Interface.
14