How Safety Instructions Are Displayed; Product-Specific Safety Instructions - BWT Perla Installation And Operating Manual

1 6 How safety instructions are
displayed
In this document safety instructions precede any
sequence of actions that could cause harm to per-
sons or damage to property. All hazard prevention
measures must be followed.
Safety instructions are displayed as follows:
SIGNAL WORD!
Source of hazard
(e.g. electric shock)
Type of hazard (e.g. risk of fatal injury)!
► Ways to prevent the hazard
Signal word Colour
DANGER
WARNING
CAUTION
NOTE
Severity of the hazard
High-risk hazard
Indicates a hazardous
situation which, if not
avoided, will result in
death or serious injury.
Hazard with a moder-
ate degree of risk
Indicates a hazardous
situation which, if not
avoided, could result in
death or serious injury.
Low-risk hazard
Indicates a hazardous
situation which, if not
avoided, may result in
minor or moderate injury.
Important information
and helpful tips
1 7 Product-specific safety
instructions
DANGER!
Mains voltage!
Risk of death by electric shock!
► Unplug device before any service and
repair work.
► If the mains cable of the unit becomes
damaged, you must replace it with the origi-
nal cable from the manufacturer.
In the following sections, you will find product-spe-
cific safety instructions whenever you must perform
certain safety-relevant actions on the device.
EN
7