Function And Location Of Parts And Controls - Sony CTE-A10 Operating Instructions Manual

B Miscellaneous
Function and Location of Parts and
Controls
5 DC IN 6V connector
4 LINE IN connector
3 LINE OUT connector
2 REC OUT connector
1 PCS VIDEO IN connector
1 PCS VIDEO IN connector (φ 3.5
mini jack)
Connects to the video output connector of
the Sony video conference system (PCS
series). The CTE-600s configured in a
cascaded connection are turned on and off
linked with the power on and off function
of the video conference system (PCS
series) via this connector.
2 REC OUT connector (φ 3.5 mini
jack)
Connects to an IC recorder, MD recorder,
or cassette recorder to record conference
proceedings. The mixed audio signals of
this party and the remote party are output.
3 LINE OUT connector (φ 3.5 mini
jack)
Connects to the audio input connector of
the Sony video conference system (PCS
series). The voice signals picked up by the
microphones of all of the CTE-600s are
output.
6 CTE-600 POWER
indicator
4 LINE IN connector (φ 3.5 mini
jack)
Connects to the audio output connector of
the Sony video conference system (PCS
series). The voice from the remote party is
sent to all of the CTE-600s.
Note
The PCS VIDEO IN connector, REC OUT
connector, LINE OUT connector and LINE
IN connector of the first CTE-A10 are
used. Those of the second CTE-600 and
later are not used.
5 DC IN 6V connector
Connects to the AC adaptor (supplied with
the CTE-600).

Function and Location of Parts and Controls

9 FROM CTE-A10
connector
8 TO CTE-600 connector
7 TO CTE-A10 connector
13
GB