Sony CTE-A10 Operating Instructions Manual page 29

Cassette recorder, etc.
to audio input
connector
Connecting cable (not supplied)
a) When connecting to the line input connector of a cassette recorder, etc.,
use a connecting cable with a φ 3.5 monaural mini plug at both ends.
When connecting to the mic input connector of a cassette recorder, etc.,
use a connecting cable with a φ 3.5 monaural mini plug with a resistor at
both ends.
The above explanation is given for the case where the audio input/output
connectors of a cassette recorder, etc., and LINE IN, LINE OUT, REC OUT
and PCS VIDEO IN connectors are φ 3.5 monaural mini jacks. Be sure not to
use a stereo jack. If you use a stereo jack, this may cause a malfunction.
About recording level
The output level from the REC OUT connector of the CTE-A10 is fixed.
You cannot adjust an output recording level.
For detailed information, refer to the Operating Instructions supplied with
the CTE-600.
CTE-600 (not supplied)
to an input/output connector
to TO CTE-600
First CTE-A10
to REC OUT
a)
to the next CTE-A10
to TO CTE-A10
to DC IN 6V
AC adaptor (supplied
with the CTE-600)
to wall outlet
AC power cord (supplied
with the CTE-600)
Configurations
11
GB