Location And Function Of Parts And Controls; Front Panel - Sony CMA-87 Operating Instructions Manual

Location and Function of Parts and Controls

Front Panel

1 CAMERA connector (12-pin)
CMA-87
1 CAMERA connector (12-pin)
Connects to the DC IN/SYNC connector of the camera
module and provides the +12 V DC power supply to the
camera module. The video signal of the camera module is
input in this connector.
The pin configuration of this connector is as follows.
2 BALANCE control
3 CAMERA connector (6-pin)
4 VGA / S VGA
connector
CAMERA VGA/SVGA OUTPUT SEL TRIG IN
BALANCE
9 1
8 2
10
7 12 11 3
6 4
5
5 OUTPUT SEL switch
6 TRIG IN connector
7 TRIG switch
TRIG
EIA INT
VGA/
EXT
SVGA
CCIR NORM
Pin no. Signal
1 Ground
2 +12 V DC
3 Video input 1 (ground)
4 Video input 1 (signal)
5 HD output (ground)
6 HD output (signal)
8 W.E OUT connector
W.E
OUT
Pin no. Signal
7 VD output (signal)
8 Video input 2 (ground)
9 Video input 2 (signal)
10 Ground
11 +12 V DC
12 VD output (ground)
41