Location And Function Of Controls - Sony ICF-2001 Operating Instructions Manual

LOCATION AND FUNCTION OF CONTROLS
Front panel and right side
Green key marks on the radio
o for scanning or presetting
D for AM (LW, MW, SW) reception
a for SSB/CW reception
LD POWER Switch
by SLEEP Timer Button
K$ LIGHT Button
O POWER Switch
Set this switch to ON to turn on the radio.
To turn off, set it to OFF.
@ SLEEP Timer Button
Press this button to set the sleep timer. See page 11.
© LIGHT Button
If you press this button when the POWER switch is set to ON, the
Frequency Display will be illuminated.
@ Telescopic Antenna
Used for both FM and AM (LW, MW, SW) reception.
© SIGNAL STRENGTH Indicator
The 5 LED indicators show the strength of the tuned signal—the
more LEDs illuminated, the better the tuning.
@ EXECUTE Key and Counter Keys
Used to input a frequency. If you punch in a desired frequency with
the Counter Keys, the frequency will. appear in the Frequency
Dispiay. Press the EXECUTE key to tune the frequency in. This is
called "Direct Tuning".
D Telescopic Antenna
5 SIGNAL STRENGTH Indicator
[sy EXECUTE Key and Counter Keys
y) Frequency Display
F2 MEMORY PRESET Buttons
ÉD BAND Selector
External Antenna Terminals
[dy EXT ANT Y]
O Frequency Display
Displayed as follows:
Length of sleep
timer operation
Frequency
ammi
1 (Like Le
290066) DH
À Indicates if low and high limits
Memorized numbers of of a frequency range for Scan Tuning
MEMORY PRESET buttons are input to the L: and Lz keys.
© MEMORY PRESET Buttons
After tuning a station in, first hold down the ENTER key, then press
one of the six MEMORY PRESET buttons to memorize the station.
An FM station or an AM station can be preset to a button.
ic
to
© BAND Selector
Choose the desired band.
FM: for FM reception
AM: for LW, MW or SW reception
SSB/CW: for SSB (single sideband) or CW (International Morse
Code) reception.
O) External Antenna Terminals [ 77 EXT ANT Y]
For connecting an external antenna. The Y terminal is for the
antenna and the ar terminal for the ground. See page 12.