Sony CTE-A10 Operating Instructions Manual page 32

6 CTE-600 POWER indicator
Lights in green when the CTE-600
connected to this CTE-A10 is turned on.
Note
This indicator does not light when the
power is supplied to the CTE-A10 by
connecting the AC adaptor (supplied with
the CTE-600).
7 TO CTE-A10 connector (14-pin)
Connects to the FROM CTE-A10 of the
next CTE-A10 using the connecting cable
supplied with the CTE-A10.
8 TO CTE-600 connector (14-pin)
Connects to the input/output connector of
the CTE-600 using the connecting cable
supplied with the CTE-600.
Note
The insertion direction of the connector and
that of the input/output connector of the
CTE-600 are inverted. When connecting
the cable to this input/output connector, the
side marked with v becomes the opposite
side (the bottom).
9 FROM CTE-A10 connector (14-
pin)
Connects to the TO CTE-A10 connector of
the preceding CTE-A10 using the
connecting cable supplied with the CTE-
A10.
14
GB
Function and Location of Parts and Controls