Download  Print this page

Advertisement

HCD-FLX5D/FLX7D

SERVICE MANUAL

Ver 1.0 2004.04
HCD-FLX5D/FLX7D are the amplifier, DVD player,
tape deck and tuner section in DHC-FLX5D/FLX7D.
Amplifier section:
The following measured at AC 127, 220, 240 V,
50/60 Hz (Saudi Arabian model only)
The following measured at AC 120, 220, 240 V,
50/60 Hz (except for Saudi Arabian model)
MULTI mode
DIN power output at stereo mode (rated)
45 + 45 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
Front speaker:
60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
Center speaker:
60 watts
(16 ohms at 1 kHz, 10%
THD)
Rear speaker:
60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
Sub woofer:
100 watts
(8 ohms at 100 Hz, 10%
THD)
Sony Corporation
9-877-739-01
2004D05-1
Home Audio Company
© 2004.04
Published by Sony Engineering Corporation
Photo: HCD-FLX7D
Model Name Using Similar Mechanism
DVD Mechanism Type
DVD
Section
Base Unit Name
Optical Traverse Unit Name
TAPE
Model Name Using Similar Mechanism
Section
SPECIFICATIONS
2.1CH mode
DIN power output at stereo mode (rated)
70 + 70 watts
(8 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
Front speaker:
120 + 120 watts
(8 ohms at 1 kHz, 10%
THD)
Sub woofer:
240 watts
(8 ohms at 100 Hz, 10%
THD)
Inputs
VIDEO/SAT IN L/R (phono jacks):
voltage 250 mV/450mV,
impedance 47 kilohms
OPTICAL DIGITAL IN (Square optical connector
jacks, rear panel) :
wavelength
——
MIC (phone jack) :
sensitivity 1 mV,
impedance 10 kilohms
E Model
HCD-FLX5D/FLX7D
Australian Model
HCD-FLX5D
NEW
CDM53N-DVBU14
DVBU14
DBU-1
NEW
Outputs
VIDEO OUT L/R (phono jacks):
voltage 250 mV,
impedance 1 kilohms
VIDEO OUT:
1 Vp-p, 75 ohms
S VIDEO OUT:
Y: 1 Vp-p, 75 ohms
C: 0.286Vp-p, 75 ohms
COMPONENT VIDEO OUT:
Y: 1 Vp -p, 75 ohm
P
: 0.7 Vp-p, 75 ohms
B
P
: 0.7 Vp-p, 75 ohms
R
PHONES (stereo mini jack):
accepts headphones of
8 ohms or more
FRONT L/R:
Use only the supplied
speaker SS-FLX9
REAR L/R:
Use only the supplied
speaker SS-RS9
CENTER:
Use only the supplied
speaker SS-CT9
S.WOOFER:
Use only the supplied
speaker SS-WG9
– Continued on next page –
DVD DECK RECEIVER

Advertisement

Table of Contents

   Also See for Sony HCD-FLX7D

   Related Manuals for Sony HCD-FLX7D

   Summary of Contents for Sony HCD-FLX7D

  • Page 1: Service Manual

    10 kilohms S.WOOFER: Use only the supplied (8 ohms at 100 Hz, 10% speaker SS-WG9 THD) – Continued on next page – DVD DECK RECEIVER Sony Corporation 9-877-739-01 2004D05-1 Home Audio Company © 2004.04 Published by Sony Engineering Corporation...
  • Page 2 LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- LISHED BY SONY.
  • Page 3 HCD-FLX5D/FLX7D This system can play the following discs Region code of DVDs you can Note on PBC (Playback Control) Format of discs Disc logo play on this system (VIDEO CDs) DVD V IDEO* You r system has a region code printed on the This system conforms to Ver.
  • Page 4: Table Of Contents

    HCD-FLX5D/FLX7D TABLE OF CONTENTS SERVICING NOTES 7-21. Schematic Diagram DSP Board (2/3) ..... 54 ..........5 7-22. Schematic Diagram DSP Board (3/3) ..... 55 7-23. Printed Wiring Board GENERAL DSP Board (Component Side) ........ 56 Location of Controls ............9 7-24.
  • Page 5: Servicing Notes

    HCD-FLX5D/FLX7D SECTION 1 SERVICING NOTES MODEL IDENTIFICATION NOTES ON HANDLING THE OPTICAL PICK-UP – Back Panel – BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electro- static break-down because of the potential difference generated by the charged electrostatic load, etc.
  • Page 6 HCD-FLX5D/FLX7D DVD MECHANISM DECK SERVICE POSITION • In checking the DVD mechanism deck section (CDM53N-DVBU14), prepare extension jig (Part No. J-2501-103-A: 1.00 mm Pitch, 29 cores, Length 300 mm). DVD mechanism deck (CDM53N-DVBV14) Any board to put. Connect extension jig (J-2501-103 A) to the MB board (CN501) and RF board (CN002) RF board (CN002).
  • Page 7 HCD-FLX5D/FLX7D DSP/GC/MB/MC/REGULATOR AND VIDEO BOARDS SERVICE POSITION • In checking the DSP/GC/MB/MC/REGULATOR and VIDEO boards, prepare extension jig (Part No. J-2501-103-A: 1.00 mm Pitch, 29 cores, Length 300 mm). DSP board VIDEO board MB board REGULATOR board (CN501) GC board Connect extension jig (J-2501-103-A) to the MB board (CN501) and RF board (CN002).
  • Page 8 HCD-FLX5D/FLX7D IC501 SERVICE POSITION • When you check IC501, please move a power trans former (T911) from a chassis. IC501 chassis power transformer (T911) Checking Location: DECISION TO PASS OR FAIL OF THE OPTICAL – MB BOARD (Component Side) – PIC-UP BLOCK Connection: oscilloscope...
  • Page 9: General

    HCD-FLX5D/FLX7D SECTION 2 This section is extracted from instruction manual. GENERAL LOCATION OF CONTROLS Main unit ALPHABETICAL ORDER BUTTON DESCRIPTIONS M – Z A – L ?/1 (power) 1 MIC jack ws Z (disc tray) 4 CD SYNC HI-DUB qg MIC LEVEL wd A Z (deck A) wh Deck A wg...
  • Page 10: Setting The Clock

    (stop) wl DVD TOP MENU qg SLEEP wg above. . (go back) wj EFFECT* es SONY TV DIRECT qj > (go forward) wj N ot e ENTER 6 SUBTITLE ea m (rewind) ra The clock settings are canceled when you disconnect M (fast forward) ra the power cord or if a power failure occurs.
  • Page 11: Disassembly

    HCD-FLX5D/FLX7D SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW 3-2. COVER (TOP), COVER (BACK) (Page 12) 3-3. CASE (Page 12) 3-4. FRONT PANEL ASSY (Page 13) 3-5. MECHANICAL 3-6. GC BOARD (CASSETTE) DECK (Page 14) (Page 14)
  • Page 12: Cover (top), Cover (back)

    HCD-FLX5D/FLX7D Note: Follow the disassembly procedure in the numerical order given. 3-2. COVER (TOP), COVER (BACK) 1 four screws 4 two claws (case 3 TP2) 2 cover (top) 3 two screws (BVTP3 5 cover (back) 3 three screws (BVTP3 3-3. CASE 4 case 1 six screws...
  • Page 13: Front Panel Assy

    HCD-FLX5D/FLX7D 3-4. FRONT PANEL ASSY 3 two connectors (CN203, CN208) 2 wire (flat type) (17 core) (CN206) 3 connector 3 connector (CN207) (CN201) MC board 1 wire (flat type) (17 core) (CN109) 6 three connectors (CN601, CN602, CN808) 4 two claws 1 screw (BVTP3 3 screw...
  • Page 14: Mechanical (cassette) Deck

    HCD-FLX5D/FLX7D 3-5. MECHANICAL (CASSETTE) DECK 4 Push two plunger solenoids 1 two screws (BVTP2.6 2 cover (TC) 6 mechanical (cassette) deck 1 Open the lid (TC) 1 two screws (BVTP2.6 3-6. GC BOARD 4 three screws (BVTP3 1 wire (flat type) (17 core) (CN204) 5 GC board 2 wire (flat type) (19 core)
  • Page 15: Dvd Mechanism Block

    HCD-FLX5D/FLX7D 3-7. DVD MECHANISM BLOCK MC board 2 connector 2 two connectors 3 six screws (CN807) (CN702, CN703) SP RELAY (BVTP3 board 5 two claws 4 two connectors (CN805, CN806) 6 claw 7 DVD mechanism block 1 wire (flat type) (11 core) (CN105) 2 connector 1 wire (flat type)
  • Page 16: Dvd Mechanism Deck (cdm53n-dvbu14)

    HCD-FLX5D/FLX7D 3-9. DVD MECHANISM DECK (CDM53N-DVBU14) 3 wire (flat type) (29core) Note: Please turn a DSP/MB/MC boards side (CN501) down and do not do decomposition work. DVD mechanism deck (CDM53N-DVBU14) 1 two screws (BVTP3 2 bracket (FL) 4 four screws (BVTP3 1 two screws...
  • Page 17: Base Unit (dvbu14)

    HCD-FLX5D/FLX7D 3-11. BASE UNIT (DVBU14) 2 four screws (BTTP M2.6) 4 magnet assy 1 connector (CN710) 5 two screws 3 two hooks 6 base unit (PTPWH M2.6) (DVBU14) 3-12. TRAY (SUB) 1 Rotating the pulley (LD), shift the slider (selection) in the arrow A direction. 2 Rotating the pulley (mode) in the arrow direction, adjust the tray (sub) to be removed.
  • Page 18: Chassis (mold B) Section, Stocker Section, Slider (selection)

    HCD-FLX5D/FLX7D 3-13. CHASSIS (MOLD B) SECTION, STOCKER SECTION, SLIDER (SELECTION) 7 two screws (PTPWH M2.6) 6 stocker section 8 slider (selection) 9 washer 0 compression 1 three screws spring (BVTP M2.6) pully (LD) 5 two step screws 2 chassis (mold B) section Note: Rotating the pully (LD), shift the slider (selection) to the left.
  • Page 19: 3-15. Sub Trans Board

    HCD-FLX5D/FLX7D 3-15. SUB TRANS BOARD 1 connector (CN901) 2 three screws (BVTP3 1 connector (CN902) 4 ground terminal 5 SUB TRANS board 3-16. BACK PANEL SECTION 2 two screws (BVTP3 1 connector (CN902) 4 connector (CN809) 1 connector (CN901) 2 screw (BVTP3 5 back panel section...
  • Page 20: 3-17. Trans Board

    HCD-FLX5D/FLX7D 3-17. TRANS BOARD 2 four screws 1 connector (CN914) 3 TRANS board 1 connector (CN915) 1 connector (CN916) 3-18. SP RELAY BOARD 5 connector (CN801) 3 two connectors (CN803, CN804) 6 SP RELAY board 4 PC board holder FRONT REAR AMP board 1 two screws (BVTP3 1 two screws...
  • Page 21: Assembly

    HCD-FLX5D/FLX7D SECTION 4 ASSEMBLY • This set can be assembled in the order shown below. 4-1. ASSEMBLY FLOW 4-2. GEARS INSTALLATION (Page 21) 4-3. SLIDER (SELECTION) INSTALLATION (Page 22) 4-4. STOCKER SECTION INSTALLATION (Page 22) 4-5. CHASSIS (MOLD B) SECTION INSTALLATION (Page 23) Note: Follow the assembly procedure in the numerical order given.
  • Page 22: Slider (selection) Installation

    HCD-FLX5D/FLX7D 4-3. SLIDER (SELECTION) INSTALLATION 6 two screws (PTPWH M2.6) 2 gear (chuking) rotary encoder 5 washer 4 compression spring 7 Insert the slider (selection) into the portion A. Align with the slot of rotary encoder. portion A 3 convex portion of slider (selection) gear (chuking) 1 rotary encoder...
  • Page 23: Chassis (mold B) Section Installation

    HCD-FLX5D/FLX7D 4-5. CHASSIS (MOLD B) SECTION INSTALLATION 3 three screws (BVTP M2.6) 2 Insert the gear (eject) 1 Insert the portion A of under the gear (LD chassis (mold B) section deceleration). portion A into the portion B of slider (selection). gear (LD deceleration) portion B of slider (selection)
  • Page 24: Test Mode

    HCD-FLX5D/FLX7D SECTION 5 TEST MODE [COLD RESET] creases. Each time the “CASSETTE LID OPEN/CLOSE DETECT” The cold reset clears all data including preset data stored in the switch is pressed, “T” value increases. RAM to initial conditions. Execute this mode when returning [GROOVE] 8.
  • Page 25 HCD-FLX5D/FLX7D Volume check: [DVD SHIP MODE (NO MEMORY CLEAR) ] [VOLUME] 1. When the knob is turned clockwise even slightly, This mode moves the optical pick-up to the position durable to the sound volume increases to its maximum and a message vibration.
  • Page 26 HCD-FLX5D/FLX7D [DVD TEST MODE GENERAL DESCRIPTION] 0-1. All (All items continuous check) This menu checks all diagnostic items continuously. Normally, all The Test Mode allows you to make diagnosis and adjustment eas- items are checked successively one after another automatically un- ily using the remote commander and monitor TV.
  • Page 27 HCD-FLX5D/FLX7D 0-2. Version 1. DRIVE AUTO ADJUSTMENT 0-2-2. Revision On the Test Mode Menu screen, press the key on the remote The revision number of ROM (IC204) that the program for commander, and the Adjustment Menu will be displayed. the DVD system processor (IC206) is stored. (4 digits hexadecimal number) ## Drive Auto Adjustment ## Adjustment Menu...
  • Page 28 HCD-FLX5D/FLX7D 2. DRIVE MANUAL OPERATION 2-1. Disc Type Note: This mode is used for design, and not used in service fundamen- tally. Disc Type On the Test Mode Menu screen, press the key on the remote Disc Type Select commander, and the Operation Menu will be displayed. For the manual operation, each servo on/off control and adjustment can 1.
  • Page 29 HCD-FLX5D/FLX7D 2-1-3. Disc Type CD 2-3. Track/Layer Jump It sets up so that it may judge as a disc type of specification of the disc with which the set was inserted. Track/Layer Jump : CD disc (normal speed, 12 cm) FWD R.Lj L0>L1 : CD disc (double speed, 12 cm) REV L.Lj L1>L0...
  • Page 30 HCD-FLX5D/FLX7D 2-5. EEPROM Write Adjust 2-7. Disc Check Memory EEPROM Write Adjust Disc Check Memory 1. Focus Offset 1. SL Disc check 2. Focus Gain 2. CD Disc check 3. Trk. Offset Coarse 3. DL Disc check 4. —————— 5. Trk. Gain 6.
  • Page 31 HCD-FLX5D/FLX7D 3. MECHA AGING Code list of Emergency History 10: Communication to RF AMP (IC001) failed. On the Test Mode Menu screen, selecting executes the aging 11: Each servo for focus, tracking, and spindle is unlocked. of the mechanism deck. 12: Check sum error of EEPROM (IC903).
  • Page 32 HCD-FLX5D/FLX7D Error code (aa) 6. VERSION INFORMATION FF : Complete the initializing. (normal operation) On the Test Mode Menu screen, selecting displays the ROM 11 : Stocker movement (to chucking position) failing in the midst version and region code. of initializing the mechanism deck. The parenthesized hexadecimal number in version field is 12 : Stocker movement (to chucking position) failing in the midst checksum value of ROM.
  • Page 33: Electrical Adjustments

    HCD-FLX5D/FLX7D SECTION 6 ELECTRICAL ADJUSTMENTS 4. Mode: Record DECK SECTION 0 dB=0.775 V REC BIAS ADJUSTMENT DECK B DVD SECTION DSP board Procedure: About the dicision to pass or fail of the optical pick-up block, re- 1. The adjustments should be performed with the rated power MD (VIDEO) (J701) In the MC test mode, the “REC memory mode”...
  • Page 34: Diagrams

    HCD-FLX5D/FLX7D SECTION 7 DIAGRAMS 7-1. BLOCK DIAGRAM – RF SERVO Section – (FLX7D) • SIGNAL PATH WARFI (Page 36) : AUDIO : CD PLAY CDDOUT (Page 37) : DVD PLAY : VIDEO : SACD PLAY 117 RFIN (FLX7D) SD0 – SD7 (for AUDIO SYSTEM) (Page 36) DOUT...
  • Page 35: Tuner/tape Deck Section

    HCD-FLX5D/FLX7D 7-2. BLOCK DIAGRAM – TUNER/TAPE DECK Section – FM/AM TUNER PACK TUNER FM 75 L-CH FM ANT L-CH (Page 37) COAXIAL R-CH R-CH ANT GND ANTENNA ST-DOUT AM ANT ST-DIN ST-CLK ANT GND ST-CE MUTING ST-MUTE TUNED TUNED STEREO DECK A/B SELECT SWITCH, STEREO PB EQ AMP...
  • Page 36: Block Diagram Audio Dsp Section (1/2) (flx7d Only)

    HCD-FLX5D/FLX7D 7-3. BLOCK DIAGRAM – AUDIO DSP Section (1/2) (FLX7D only) – WARFI RF BUFFER (Page 34) 126 WARFI 63 DSIFL DSAL FLR, CSW, SLR, IC810 MCK, BCK, LRCK DSAR 64 DSIFR (Page 34) 123 WCK (Page 37) F2FLREX1 DSAC 65 DSICT F2CSWEX2 DSALFE...
  • Page 37 HCD-FLX5D/FLX7D 7-4. BLOCK DIAGRAM – AUDIO DSP Section (2/2) – TUNER L-CH • R-ch is omitted due to same as L-ch. (Page 35) • SIGNAL PATH TAPE J701 (1/2) : AUDIO : TAPE PLAY L-CH : REC : TUNER (Page 35) VIDEO (SAT) : VIDEO (SAT) : CD PLAY...
  • Page 38: Power Amp Section

    HCD-FLX5D/FLX7D 7-5. BLOCK DIAGRAM – POWER AMP Section – J301 HP SW (Page 40) TM801 –2 FEED BACK (Page 37) FRONT L –2 – –1 –1 FRONT R (Page 37) – RY801 POWER AMP RELAY DRIVE IC401 Q801 R-CH –2 RY802 –1 RELAY DRIVE...
  • Page 39: Video Section

    HCD-FLX5D/FLX7D 7-6. BLOCK DIAGRAM – VIDEO Section – • SIGNAL PATH : VIDEO VDAC_0 : CHROMA SD0 – SD7 (Page 34) AV DATA BUS VIDEO AMP, 75Ω DRIVER : COMPONENT VIDEO IC701 6 YIN YOUT VDAC_2 XDCK, XSAK, SDEF WIDE SWITCH XDCK (Page 34) 2 CIN...
  • Page 40: Block Diagram Display/power Supply Section

    HCD-FLX5D/FLX7D 7-7. BLOCK DIAGRAM – DISPLAY/POWER SUPPLY Section – CD/DVD DOOR OPEN/CLOSE MOTOR DRIVE IC302 EVER+4V S702 (LID) PRTC_SW OUT1 M301 DOOR MOTOR+ (ON: When CD/DVD lid is close.) MOTOR D103, 104 CD/DVD DOOR OUT2 DRIVE DOOR MOTOR– OPEN/CLOSE S701 (MID OUT) MIDOUT_SW D101, 102 +3.3V...
  • Page 41: Note For Printed Wiring Boards And Schematic Diagrams

    HCD-FLX5D/FLX7D 7-8. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS • Circuit Boards Location FRONT REAR AMP board SP RELAY board Note on Printed Wiring Boards: Note on Schematic Diagram: • X : parts extracted from the component side. • All capacitors are in F unless otherwise noted. pF: •...
  • Page 42: Printed Wiring Board - Rf Board

    HCD-FLX5D/FLX7D 7-9. PRINTED WIRING BOARD – RF Board – • See page 41 for Circuit Boards Location. :Uses unleaded solder. RF BOARD RF BOARD (COMPONENT SIDE) (CONDUCTOR SIDE) R041 C003 C001 Q002 R009 OPTICAL R008 TRAVERSE L002 UNIT R007 R005 D002 (DBU-1) C005...
  • Page 43: Schematic Diagram - Rf Board

    HCD-FLX5D/FLX7D 7-10. SCHEMATIC DIAGRAM – RF Board – • • See page 84 for Waveforms. See page 86 for IC Block Diagram. RFMON C006 C028 C027 R026 C013 CN002 C030 0.01 C026 AGND C025 R023 C029 RFAC 0.01 C024 C035 AGND JL005 0.01...
  • Page 44: Mb Board (component Side)

    HCD-FLX5D/FLX7D 7-11. PRINTED WIRING BOARD – MB Board (Component Side) – • :Uses unleaded solder. See page 41 for Circuit Boards Location. • Semiconductor Location Ref. No. Location (FLX7D) DSP BOARD D201 B-10 CN603 MB BOARD (COMPONENT SIDE) (Page 57) IC206 F-10 IC215...
  • Page 45: Mb Board (conductor Side)

    HCD-FLX5D/FLX7D 7-12. PRINTED WIRING BOARD – MB Board (Conductor Side) – • :Uses unleaded solder. See page 41 for Circuit Boards Location. • Semiconductor Location Ref. No. Location D901 MB BOARD (CONDUCTOR SIDE) IC202 IC203 (FLX7D) IC204 R434 R432 IC210 R435 R433 R431...
  • Page 46: Schematic Diagram Mb Board (1/7)

    HCD-FLX5D/FLX7D 7-13. SCHEMATIC DIAGRAM – MB Board (1/7) – • • See page 84 for Waveforms. See page 86 for IC Block Diagram. See page 94 for IC Pin Function Description. (1/7) AGND A3V-1 DGND (Page 49) M12V MGND C526 C527 C522 0.01...
  • Page 47: Schematic Diagram Mb Board (2/7)

    HCD-FLX5D/FLX7D 7-14. SCHEMATIC DIAGRAM – MB Board (2/7) – • See page 84 for Waveforms. See page 94 for IC Pin Function Description. (2/7) JITOFF RF_AC R726 100k R700 R725 C721 TP701 TP703 8.2k 1.8k R727 3.3k C715 0.0015 R545 R544 R540 R550...
  • Page 48: Schematic Diagram Mb Board (3/7)

    HCD-FLX5D/FLX7D 7-15. SCHEMATIC DIAGRAM – MB Board (3/7) – • • See page 84 for Waveforms. See page 86 for IC Block Diagrams. See page 94 for IC Pin Function Description. (3/7) (FLX7D) DGND C795 R801 SL808 CL883 CL885 FL810 +2.5V REGULATOR C797 IC702...
  • Page 49: Schematic Diagram Mb Board (4/7)

    HCD-FLX5D/FLX7D 7-16. SCHEMATIC DIAGRAM – MB Board (4/7) – • • See page 84 for Waveforms. See page 86 for IC Block Diagrams. See page 94 for IC Pin Function Description. (Page 47) (4/7) (FLX7D) DOUT 768FS XRST_DSD XRST_CD I2C_SCL I2C_SIO LDSEL (Page 48)
  • Page 50: Schematic Diagram Mb Board (5/7)

    HCD-FLX5D/FLX7D 7-17. SCHEMATIC DIAGRAM – MB Board (5/7) – • See page 84 for Waveforms. See page 94 for IC Pin Function Description. (5/7) CN204 R258 R259 R257 C228 4.7k 4.7k 4.7k 0.01 R272 R273 R274 R275 R276 VGND R232 R283 VMUTE C225...
  • Page 51: Schematic Diagram Mb Board (6/7)

    HCD-FLX5D/FLX7D 7-18. SCHEMATIC DIAGRAM – MB Board (6/7) – • See page 86 for IC Block Diagram. (6/7) MD15 FL202 FL203 C217 C257 C258 0.01 0.01 MD14 C219 C253 0.01 0.01 MD13 R249 R214 MD12 C254 MD11 C234 0.01 32Mbit PROGRAMMABLE ROM MD10 C204 IC204...
  • Page 52: Schematic Diagram Mb Board (7/7)

    HCD-FLX5D/FLX7D 7-19. SCHEMATIC DIAGRAM – MB Board (7/7) (FLX7D only) – • See page 86 for IC Block Diagram. (7/7) BUFFER IC402 SN74LV245APWR C411 CN401 0.01 LRCK R431 R432 LRCK R433 R434 256FS R435 R436 256FS SYNC R429 SYNC (Page 55) INIT R430 INIT...
  • Page 53 HCD-FLX5D/FLX7D 7-20. SCHEMATIC DIAGRAM – DSP Board (1/3) – • See page 84 for Waveforms. See page 94 for IC Pin Function Description. (1/3) CN602 JR617 SPDIF(DVD) D+4V SPDIF(CD) JR616 D-GND(DSP) (Page 54) DSP-CS DSP-ACK DIR-Rx R614 C608 0.001 DIR_INT (Page 59) DIR-CS DIR-UNLOCK...
  • Page 54: Schematic Diagram Dsp Board

    HCD-FLX5D/FLX7D 7-21. SCHEMATIC DIAGRAM – DSP Board (2/3) – J701 VIDEO(SAT) (CHASSIS GND) (2/3) FB702 R703 R753 R751 C741 R701 C704 C754 220p 220p R754 100k C702 C752 R704 JR710 220p 220p 100k R702 R752 CN601 100k 100k LINE-MUTE SP-MODE DBFB FEEDBACK A+10V C751...
  • Page 55: Dsp Board (3/3)

    HCD-FLX5D/FLX7D 7-22. SCHEMATIC DIAGRAM – DSP Board (3/3) – • • See page 84 for Waveforms. See page 86 for IC Block Diagrams. (Page 54) (3/3) R657 1.5k JR623 R656 R654 C662 C659 C663 C648 R653 R652 R651 0.001 TP608 C661 C660 470p...
  • Page 56: Dsp Board (component Side)

    HCD-FLX5D/FLX7D 7-23. PRINTED WIRING BOARD – DSP Board (Component Side) – • See page 41 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location Ref. No. Location IC601 IC603 DSP BOARD (COMPONENT SIDE) IC611 IC612 IC701 F-10 IC702 IC703 IC704 R635 R637...
  • Page 57: Dsp Board (conductor Side)

    HCD-FLX5D/FLX7D 7-24. PRINTED WIRING BOARD – DSP Board (Conductor Side) – • See page 41 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location Ref. No. Location (FLX7D) MB BOARD D601 D-12 CN401 (Page 44) D606 DSP BOARD (CONDUCTOR SIDE) D611 JR618 D612...
  • Page 58: Printed Wiring Board - Mc Board

    HCD-FLX5D/FLX7D 7-25. PRINTED WIRING BOARD – MC Board – • See page 41 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location Ref. No. Location ANTENNA D101 FM 75 D102 COAXIAL D103 D104 D105 D106 FM/AM TUNER PACK D202 SUPPLIED WITH THE D203 DSP BOARD...
  • Page 59: Schematic Diagram - Mc Board

    HCD-FLX5D/FLX7D 7-26. SCHEMATIC DIAGRAM – MC Board – • See page 84 for Waveforms. See page 94 for IC Pin Function Description. (Page 49) CN112 SUPPLIED WITH R272 R273 THE ASSEMBLED CN105 BLOCK ST-MUTE R OUT A GND FM 75 COAXIAL L OUT EP201...
  • Page 60: Front Rear Amp Board

    HCD-FLX5D/FLX7D 7-27. PRINTED WIRING BOARD – FRONT REAR AMP Board – • See page 41 for Circuit Boards Location. :Uses unleaded solder. SP RELAY BOARD CN801 (Page 64) FRONT REAR AMP BOARD CN402 JW402 JW403 C494 NO701 JW405 JW404 JW406 JW407 Q472 TRANS...
  • Page 61: Schematic Diagram - Front Rear Amp Board

    HCD-FLX5D/FLX7D 7-28. SCHEMATIC DIAGRAM – FRONT REAR AMP Board – POWER AMP IC401 STK402-070S R455 NO701 0.22 C455 C456 R460 AC1(VL) AC1(VL) AC-GND R457 R456 0.22 AC-GND D491 D15XB20 AC1(VL) AC1(VL) R454 (Page 81) C451 R451 R458 R421 2.2k C493 C491 Q423 2200...
  • Page 62: Center Sw Amp Board

    HCD-FLX5D/FLX7D 7-29. PRINTED WIRING BOARD – CENTER SW AMP Board – • :Uses unleaded solder. See page 41 for Circuit Boards Location. • Semiconductor Location Ref. No. Location TRANS BOARD (Page 80) CN916 CENTER SW AMP BOARD D501 D502 D551 D552 D591 NO702...
  • Page 63: Center Sw Amp Board

    HCD-FLX5D/FLX7D 7-30. SCHEMATIC DIAGRAM – CENTER SW AMP Board – NO702 AC2(VH) AC2(VH) AC GND POWER AMP AC GND IC501 STK442-130 AC2(VH) AC2(VH) AC3(MOTOR) D591 (Page 81) RECT D591 D15XB20 AC3(MOTOR) C593 C591 R591 2200 100k 100V C594 C592 C551 R592 2200 R551...
  • Page 64: Speaker Section

    HCD-FLX5D/FLX7D 7-31. PRINTED WIRING BOARDS – SPEAKER Section – • See page 41 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location REGULATOR BOARD C878 C871 C872 C880 C873 C881 Q865 Ref. No. Location C870 D801 JW962 MC BOARD (Page 58) MC BOARD NO704...
  • Page 65: Regulator Board

    HCD-FLX5D/FLX7D 7-32. SCHEMATIC DIAGRAM – REGULATOR Board – IC801 TA7804LS C870 C878 +4V REGULATOR IC802 TA7805S C871 C879 NO704 +5V REGULATOR IC803 TA7810S C872 C880 +10V REGULATOR (Page 67) IC804 TA7805S C873 C881 +5V REGULATOR Q864 2SB1375 R871 2.7k R872 2.7k R873 2.7k...
  • Page 66: Sp Relay Board (1/2)

    HCD-FLX5D/FLX7D 7-33. SCHEMATIC DIAGRAM – SP RELAY Board (1/2) – • See page 84 for Waveforms. (1/2) DVD+12V CD/DVD POWER M-GND M+9V UNREG-GND NO816 UNREG(M) 0.0022 A-GND M+12V PB-R 1 50V C844 M+12V (Page 63) C854 4.7k R889 0.01 REC-R 10 50V M-GND A-GND...
  • Page 67: Sp Relay Board (2/2)

    HCD-FLX5D/FLX7D 7-34. SCHEMATIC DIAGRAM – SP RELAY Board (2/2) – (Page 61) (Page 81) CN803 OVERLOAD STK MUTE POWER GND POWER GND CN801 NO703 CENTER GND CENTER GND R815 C815 CENTER (2/2) 100V CENTER SW GND C823 (Page 63) 0.01 SW GND R839 R837...
  • Page 68: Gc Board

    HCD-FLX5D/FLX7D 7-35. PRINTED WIRING BOARD – GC Board – • :Uses unleaded solder. See page 41 for Circuit Boards Location. • Semiconductor Location GC BOARD Ref. No. Location D201 D202 D203 FL201 D204 FLUORESCENT INDICATOR TUBE IC201 IC202 JW313 C210 JW315 JW314 Q201...
  • Page 69: Gc Board

    HCD-FLX5D/FLX7D 7-36. SCHEMATIC DIAGRAM – GC Board – • See page 84 for Waveform. See page 94 for IC Pin Function Description. FL201 FLUORESCENT INDICATOR TUBE EP202 C209 C221 (CHASSIS) CN201 EVER+3.3V C210 LED A LED B Q212 2SC2785 Q203-206,212 LED GND C223 LED DRIVE...
  • Page 70: Changer Section

    HCD-FLX5D/FLX7D 7-37. PRINTED WIRING BOARDS – CHANGER Section – • See page 41 for Circuit Boards Location. :Uses unleaded solder. CLAMP MOTOR BOARD INIT/COUNT SW BOARD SENSOR 2 BOARD OUT/MIDOUT SW BOARD S702 (LID) ON : WHEN CD LID IS CLOSE (11) 1-683-900- Q703...
  • Page 71: Changer Section

    HCD-FLX5D/FLX7D 7-38. SCHEMATIC DIAGRAM – CHANGER Section – • See page 86 for IC Block Diagrams. D704 GL528VS1 CN708 CN702 DISC IN DETECT R711 SENSOR R707 R709 2.2k Q701 RT1N141 R708 LEVEL SHIFT S702 (LID) (ON:WHEN CD/DVD LED IS CLOSE.) CN701 OUT SW S701...
  • Page 72: Cd Door Section

    HCD-FLX5D/FLX7D 7-39. PRINTED WIRING BOARDS – CD DOOR Section – • See page 41 for Circuit Boards Location. :Uses unleaded solder. BLUE LED BOARD CD MOTOR BOARD D308 C316 MULTI CHANNEL DECODING (11) 1-861-348- R315 NO807B R340 JW397 R316 M301 CD DOOR BOARD JW395 CD/DVD DOOR...
  • Page 73: Cd Door Section

    HCD-FLX5D/FLX7D 7-40. SCHEMATIC DIAGRAM – CD DOOR Section – • See page 86 for IC Block Diagram. NO807B NO807A (Page 69) CN309 R384 4.7k R388 4.7k R383 4.7k R387 4.7k D308 S341 SELU5E23C R382 4.7k R386 4.7k C316 ROTARY 0.001 MULTI CHANNEL ENCODER R381...
  • Page 74: Panel Section

    HCD-FLX5D/FLX7D 7-41. PRINTED WIRING BOARDS – PANEL Section – • See page 41 for Circuit Boards Location. :Uses unleaded solder. PANEL (L) BOARD D304 D303 R307 D301 D302 R338 R308 R309 R303 D304, S307 D303, S306 D302, S305 D301, S301 TAPE A/B TUNER/ S326...
  • Page 75: Panel Section

    HCD-FLX5D/FLX7D 7-42. SCHEMATIC DIAGRAM – PANEL Section – R302 R321 R322 R323 R324 R325 R326 R327 R328 1.5k 1.5k 2.2k 3.3k 4.7k 6.8k S311 S312 S313 S314 S315 S316 S317 S318 S319 D304 D303 D302 D301 SELS5923C SELS5923C SELS5923C SEL5223S NO812 TAPE A/B TUNER/BAND...
  • Page 76 HCD-FLX5D/FLX7D 7-43. PRINTED WIRING BOARD – MIC Board – • See page 43 for Circuit Boards Location. :Uses unleaded solder. MIC BOARD C380 C368 C373 R366 IC352 RV352 R370 ECHO LEVEL R375 R371 C372 C370 C378 R373 R367 C369 C377 C358 C366 C364...
  • Page 77 HCD-FLX5D/FLX7D 7-44. SCHEMATIC DIAGRAM – MIC Board – • See page 86 for IC Block Diagram. C360 R358 100p 150k MIC AMP IC351(2/2) C358 IC351(1/2) C351 C361 C356 NJM4580E-D R357 NJM4580E-D R352 0.22 R359 C359 C355 J351 R356 R355 C357 220p FB351 C364...
  • Page 78: Mic Board Mic Board Video Board

    HCD-FLX5D/FLX7D 7-45. PRINTED WIRING BOARD – VIDEO Board – • See page 41 for Circuit Boards Location. :Uses unleaded solder. MB BOARD (Page 44) CN204 VIDEO BOARD CN701 L701 JW710 C765 C764 C766 JW704 Q712 R725 C701 JW709 IC701 C742 Q711 JW706 C746...
  • Page 79: Video Board

    HCD-FLX5D/FLX7D 7-46. SCHEMATIC DIAGRAM – VIDEO Board – • • See page 84 for Waveforms. See page 86 for IC Block Diagram. CN701 VIDEO AMP, DRIVER VGND IC701 J701 VMUTE1 MM1568 R722 R_GND C751 22 50V FB717 R702 GND2 P /C CR OUTA CR/B C762...
  • Page 80: Trans Board

    HCD-FLX5D/FLX7D 7-47. PRINTED WIRING BOARD – TRANS Board – • :Uses unleaded solder. See page 41 for Circuit Boards Location. TRANS BOARD R912 Q971 R914 D912 R917 D914 R916 EXCEPT FLX5D: KR, TH, AUS R915 (FLX5D: AUS) SP RELAY BOARD D911 NO703 R913...
  • Page 81: Trans Board

    HCD-FLX5D/FLX7D 7-48. SCHEMATIC DIAGRAM – TRANS Board – CN915 AC1(VL) AC1(VL) AC GND AC GND (FLX5D:KR,TH,AUS) AC1(VL) 4P (EXCEPT FLX5D:KR,TH,AUS) AC1(VL) (Page 61) (EXCEPT FLX5D:KR,TH,AUS) (FLX5D:AUS) T911 JW921 MAIN F916 (FLX5D:KR,TH) T8AL POWER 250V TRANSFORMER JW922 CN916 230/240 F914 T8AL AC2(VH) 250V AC2(VH)
  • Page 82: Sub Trans Board

    HCD-FLX5D/FLX7D 7-49. PRINTED WIRING BOARD – SUB TRANS Board – • :Uses unleaded solder. See page 41 for Circuit Boards Location. • Semiconductor Location Ref. No. Location D901 SUB TRANS BOARD D902 (EXCEPT FLX5D: KR, TH, AUS) D903 D904 D905 D906 NO606 IC901...
  • Page 83: Sub Trans Board

    HCD-FLX5D/FLX7D 7-50. SCHEMATIC DIAGRAM – SUB TRANS Board – CN902 (FLX5D:KR,TH,AUS) (EXCEPT FLX5D:KR,TH,AUS) (EXCEPT FLX5D:KR,TH,AUS) JW911 (EXCEPT FLX5D:KR,TH,AUS) JW912 CN902 F913 (FLX5D:KR,TH,AUS) T5AL 250V JW907 (Page 81) JW906 (FLX5D:KR,TH,AUS) (EXCEPT FLX5D:KR,TH,AUS) R904 (EXCEPT FLX5D:KR,TH,AUS) S901 RY901 VOLTAGE SELECTOR 230-240V 230-240V Q901 2SC2785TP D901-904...
  • Page 84 HCD-FLX5D/FLX7D Waveforms – RF Board – – MB Board – IC001 1 (DVDRFP) IC509 q; (WFCK) IC509 ua (XTAI) IC801 qa (MCKI) IC906 3 (MO1) IC206 <zcz (VDAC 0) (CD/DVD PLAY) (CD/DVD PLAY) (CD/DVD PLAY) (CD/DVD PLAY) (CD/DVD PLAY) (NTSC Color Bar) 4.5 Vp-p 5.0 Vp-p 4.2 Vp-p...
  • Page 85 HCD-FLX5D/FLX7D – DSP Board – – SP RELAY Board – – MC Board – – GC Board – – VIDEO Board – IC601 qj (MCLK2) IC611 qh (SYSCK) Q4, Q5 (Base) IC101 qa (XC-OUT) IC201 id (XO) IC701 qk, ql (CR OUT) (REC mode) (NTSC Color Bar) 2.1 Vp-p...
  • Page 86 HCD-FLX5D/FLX7D • IC Block Diagrams – MB Board – – RF Board – IC203 BR9040F-WE2 IC001 SP3723CAF0PM 64 63 62 61 60 59 55 54 53 52 COMMAND FAST ATTACK 4096bit REGISTER INPUT EEPROM ARRAY OUTPUT HOLD FULL WAVE AGC CHARGE WRITE INHIBIT RECTIFER...
  • Page 87 HCD-FLX5D/FLX7D IC401 CXD9633Q 58 57 56 55 51 50 44 43 2FS I/F TEST/MONITOR CONTROL EXT. VDD6 DATA SELECT DSBCKF EXT. DSIFL CLOCK DSIFR SELECT DSICT DSISW 40 VSS4 DSISL 39 DIR2CK DSISR CLOCK GENERATOR DIRDSCK1 INTERNAL & CLOCK DIRDSCK2 TIMING CONTROL 38 SELDH1...
  • Page 88 HCD-FLX5D/FLX7D IC509 CXD3068Q 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 DVDD2 ASYE DIGITAL ASYMMETRY CORRECTOR DIGITAL DOUT LRCK D/A DIGITAL PCMD INTERFACE DEMODULATOR TES1 TEST1 ERROR DVSS1 CORRECTOR FOCUS FOCUS FRDR...
  • Page 89 HCD-FLX5D/FLX7D IC808 MSM56V16160F-8TK7R1 35 34 TIMING REGISTER PROGRAMING OUTPUT REGISTER BUFFERS LATENCY INTERNAL INTERNAL COLUMN & COLUMN READ ADDRESS ADDRESS BURST ADDRESS ADDRESS DATA BUFFERS BUFFERS CONTROLLER COUNTOR COUNTOR REGISTER CONTROLLER INPUT DATA SENSE COLUMN REGISTER AMPLIFIER DECODERS BANK INPUT CONTROLLER BUFFERS MEMORY...
  • Page 90 HCD-FLX5D/FLX7D – CLAMP MOTOR Board – IC701 BA6956AN CONTROL LOGIC – LOADING MOTOR Board – IC702 BA6956AN CONTROL LOGIC – CD MOTOR Board – IC302 BA6956AN CONTROL LOGIC...
  • Page 91 HCD-FLX5D/FLX7D – DSP Board – IC603 LC89057W-VF4-E MODULATOR MICROCONTROLLER & INTERFACE PARALLEL PORT RERR RXOUT CKST AUDIO/VO C bit, U bit EMPHA/UO 31 DGND DATA INPUT DEMODULATOR DVDD SELECTOR DATA & DGND SELECTOR LOCK DETECT DVDD RX5/V1 RX6/U1 XOUT XMCK DVDD CLOCK DGND...
  • Page 92 HCD-FLX5D/FLX7D IC612 PCM1609KPTR 32 31 30 36 35 34 33 VCC3 FUNCTION AGND3 CONTROL VCC4 INTERFACE AGND4 SYSTEM SCKI CLOCK SCKO MANAGER VOUT8 AGND6 VCC5 LRCK AGND5 TEST 4X/8X ENHANCED VOUT7 OVER SAMPLING MULTI- SERIAL LEVEL DIGITAL INPUT FILTER DELTA- INTERFACE WITH SIGMA...
  • Page 93 HCD-FLX5D/FLX7D – VIDEO Board – IC701 MM1568AJBE VCC2 VCC1 BIAS COUT DRIVER MUTE1 CLAMP GND2 VOUT DRIVER YC MIX VSAG CLAMP GND2 YOUT DRIVER BIAS BIAS YSAG GND1 GND1 10 NC 11 GND2 CYIN 12 CYOUT DRIVER CLP 13 CYSAG BIAS CLAMP GND2...
  • Page 94 HCD-FLX5D/FLX7D IC Pin Function Description MB BOARD IC206 ZIVA5X-C2F (DVD SYSTEM PROCESSOR) Pin No. Pin Name Description VDDP — Power supply terminal (+3.3V) Address signal output to the program ROM and bus interface 3 to 11 HAD15 to HAD7 Two-way data bus with the program ROM and bus interface VDDP —...
  • Page 95 HCD-FLX5D/FLX7D Pin No. Pin Name Description 81 to 84 MD16 to MD19 Two-way data bus with the SD-RAM GND25 — Ground terminal MDQM2 Write mask signal output to the SD-RAM VDD25 — Power supply terminal (+3.3V) 88 to 95 MD20 to MD27 Two-way data bus with the SD-RAM GND25 —...
  • Page 96 HCD-FLX5D/FLX7D Pin No. Pin Name Description System clock signal (33.8688 MHz) input from the clock generator XVDD — Power supply terminal AVSS2 — Ground terminal AVDD2 — Power supply terminal (+3.3V) AVDD1 — Power supply terminal (+3.3V) AVSS1 — Ground terminal —...
  • Page 97 HCD-FLX5D/FLX7D Pin No. Pin Name Description DRVRDY Ready signal input from the mechanism controller — Power supply terminal (+5V) Latch enable signal output to the bus interface RST_SPC Reset signal output to the mechanism controller HCS3 to HCS1 Chip select signal output terminal Not used 192 to 194 HCS0 Chip select signal output to the program ROM...
  • Page 98 HCD-FLX5D/FLX7D MB BOARD IC509 CXD3068Q (DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO PROCESSOR) Pin No. Pin Name Description DVDD0 — Power supply terminal (+3.3V) (digital system) XRST Reset signal input from the mechanism controller “L”: reset MUTE Muting on/off control signal input from the mechanism controller “H”: muting on DATA Serial data input from the mechanism controller XLAT...
  • Page 99 HCD-FLX5D/FLX7D Pin No. Pin Name Description AVSS0 — Ground terminal (analog system) IGEN Stabilized current input for operational amplifiers AVDD0 — Power supply terminal (+3.3V) (analog system) ASYO EFM full-swing output terminal ASYI Asymmetry comparator voltage input terminal RFAC EFM signal input from the DVD/CD RF amplifier AVSS1 —...
  • Page 100 HCD-FLX5D/FLX7D MB BOARD IC701 TMC57929PGF-RDP (DVD DECODER) Pin No. Pin Name Description 1, 2 D5, D6 Two-way data bus with the mechanism controller — Ground terminal (digital system) Two-way data bus with the mechanism controller Address signal input from the mechanism controller —...
  • Page 101 HCD-FLX5D/FLX7D Pin No. Pin Name Description DVD mode: Serial data request signal input from the DVD system processor XSRQ SACD mode: Serial data request signal input from the DSD decoder (FLX7D only) HINT Not used XS16 Not used Not used XPDI Not used VDDS...
  • Page 102 HCD-FLX5D/FLX7D Pin No. Pin Name Description RFDCC Input terminal for adjusting DC cut high-pass filter for RF signal Not used RFIN RF signal input from the DVD/CD RF amplifier 118, 119 VCCA5, VCCA4 — Power supply terminal (+3.3V) (analog system) VCOR1 —...
  • Page 103 HCD-FLX5D/FLX7D Pin No. Pin Name Description XTAL 33.8688 MHz clock signal input terminal — Ground terminal (digital system) XTA2 System clock output terminal (33.8688 MHz) XTA1 System clock input terminal (33.8688 MHz) — Power supply terminal (+3.3V) (digital system) 172 to 176 D0 to D4 Two-way data bus with the mechanism controller...
  • Page 104 HCD-FLX5D/FLX7D MB BOARD IC801 CXD2752R (DSD DECODER) (FLX7D only) Pin No. Pin Name Description VSCA0 — Ground terminal (for core) XMSLAT Serial data latch pulse signal input from the mechanism controller MSCK Serial data transfer clock signal input from the mechanism controller MSDATI Serial data input from the mechanism controller VDCA0...
  • Page 105 HCD-FLX5D/FLX7D Pin No. Pin Name Description BCKAO Bit clock signal (2.8224 MHz) output terminal for DSD data output Not used PHREFI Bit clock signal (2.8224 MHz) input terminal for DSD data output Not used PHREFO Bit clock signal (2.8224 MHz) output to the digital audio processor ZDFL Front L-ch Zero data flag detection signal output terminal Not used DSAL...
  • Page 106 HCD-FLX5D/FLX7D Pin No. Pin Name Description 117 to 120 WAD4 to WAD7 External A/D data input terminal for PSP physical disc mark detection Not used VDCB2 — Power supply terminal (+2.5V) (for core) WRFD Not used Operation clock signal input for PSP physical disc mark detection from the DVD decoder WAVDD0, 124, 125 —...
  • Page 107 HCD-FLX5D/FLX7D MB BOARD IC901 CXP973064-236R (MACHANISM CONTROLLER) Pin No. Pin Name Description EEP SO Not used SDEN Serial data enable signal output to DVD/CD RF amplifier DOCTRL/ Digital out on/off control signal output to the digital signal processor ISBTEST “L”: digital out off, “H”: digital out on EEP WC Not used EEP SI...
  • Page 108 HCD-FLX5D/FLX7D Pin No. Pin Name Description SQSO Subcode Q data input from the digital signal processor MUTE DSD Muting on/off control signal output to the DSD decoder “H”: muting on (FLX7D only) SQCK Subcode Q data reading clock signal output to the digital signal processor —...
  • Page 109 HCD-FLX5D/FLX7D DSP BOARD IC601 CXD9720Q (AUDIO DIGITAL SIGNAL PROCESSOR) Pin No. Pin Name Description — Ground terminal XRST Reset signal input from the digital audio interface receiver “L”: reset EXTIN Master clock signal input terminal Not used L/R sampling clock signal input from the A/D converter or digital audio interface receiver or LRCKI3 digital audio processor VDDI...
  • Page 110 HCD-FLX5D/FLX7D Pin No. Pin Name Description Output enable signal output to the S-RAM Chip select signal output to the S-RAM Write enable signal output to the S-RAM VDDE — Power supply terminal (+3.3V) WMD1 S-RAM wait mode setting terminal Fixed at “H” in this set —...
  • Page 111 HCD-FLX5D/FLX7D Pin No. Pin Name Description Address signal output to the S-RAM PLL reset signal input from the digital audio interface receiver SDI3 Audio serial data input from the digital audio processor (FLX7D only) SDI4 Audio serial data input from the digital audio processor (FLX7D only) Synchronous/asychronous selection signal input terminal SYNC “L”: Synchronous, “H”: asynchronous (fixed at “H”...
  • Page 112 HCD-FLX5D/FLX7D MC BOARD IC101 M3062CMEN-A05FPU0 (SYSTEM CONTROLLER) Pin No. Pin Name Description AMP-DATA Serial data output to the M61520FP AMP-CLK Serial data transfer clock signal output to the M61520FP AMP-LAT Serial data latch pulse signal output to the M61520FP SIRCS Remote control signal input from the remote control receiver DIG-TX Serial data output to the audio digital signal processor and digital audio interface receiver...
  • Page 113 HCD-FLX5D/FLX7D Pin No. Pin Name Description Serial data latch pulse output terminal Not used XRST Reset signal output to the DVD system processor “L”: reset VIDEO-MUTE, 44, 45 Video muting on/off control signal output terminal “L”: muting on VIDEO-MUTE2 NO-USE —...
  • Page 114 HCD-FLX5D/FLX7D Pin No. Pin Name Description Automatic limiter control signal output “H”: limiter on DIR-RST Reset signal output to the digital audio interface receiver SW phase control signal output terminal A-SHUT Shut off detection signal input from the deck-A side reel pulse detector B-SHUT Shut off detection signal input from the deck-B side reel pulse detector B-HALF...
  • Page 115 HCD-FLX5D/FLX7D GC BOARD IC201 MB90M407PF-G-138-BNDE1 (FLUORESCENT INDICATOR TUBE DRIVER, KEY CONTROL, CD/DVD MECHANISM DECK CONTROLLER) Pin No. Pin Name Description 1 to 8 G17 to G24 Grid drive signal output to the fluorescent indicator tube 9, 10 A36, 35 — Segment drive signal output to the fluorescent indicator tube VSS-(IO) Ground terminal (for I/O port)
  • Page 116 HCD-FLX5D/FLX7D Pin No. Pin Name Description VSS-(CPU) — Ground terminal (for CPU) System clock input terminal (4 MHz) System clock output terminal (4 MHz) VCC-(CPU) — Power supply terminal (+3.3V) (for CPU) 85 to 100 G1 to G16 Grid drive signal output to the fluorescent indicator tube...
  • Page 117 HCD-FLX5D/FLX7D GC BOARD IC202 PT8300R-TP (FRONT PANEL CONTROLLER) Pin No. Pin Name Description — Ground terminal RESET_B Reset signal input from the system controller Serial data transfer clock signal input from the fuluorescent indicator driver LATCH Serial data latch pulse input from the fuluorescent indicator driver TC SW Key input terminal (A/D input) CD SW 3...
  • Page 118: Exploded Views

    HCD-FLX5D/FLX7D SECTION 8 EXPLODED VIEWS NOTE: -XX and -X mean standardized parts, so they Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark may have some difference from the original are seldom required for routine service.
  • Page 119: Mechanical (cassette) Deck Section

    HCD-FLX5D/FLX7D 8-2. MECHANICAL (CASSETTE) DECK SECTION not supplied CD MOTOR/CD DOOR SW1/MIC/PANEL (U)/ TC DOOR/TC DOOR SW boards section not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-252-018-01 LID (TC) 4-252-049-01 SPRING (TC-B) 4-252-046-01 SPRING (LID-L) X-2021-009-1 TC HOLDER (A) ASSY 4-252-047-01 SPRING (LID-R) X-2021-010-1 TC HOLDER (B) ASSY...
  • Page 120: Tc Door/tc Door Sw Boards Section

    HCD-FLX5D/FLX7D 8-3. CD MOTOR/CD DOOR SW1/MIC/PANEL (U)/TC DOOR/TC DOOR SW BOARDS SECTION M301 not supplied not supplied not supplied (CD MOTOR board) supplied PM301 not supplied PM302 not supplied not supplied not supplied not supplied not supplied supplied with J351 supplied not supplied (PANEL (U) board)
  • Page 121: Moving Panel Section

    HCD-FLX5D/FLX7D 8-4. MOVING PANEL SECTION front panel section not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-252-032-01 BASE (VOL), ORNAMENT X-4954-585-1 BRACKET (PANEL, MOVING) ASSY X-4956-331-1 RING (VOL) ASSY 4-252-036-01 PANEL (AL), MOVING (FLX5D)
  • Page 122: Front Panel Section

    Part No. Description Remark Ref. No. Part No. Description Remark 4-963-404-21 EMBLEM (5-A), SONY 4-951-620-01 SCREW (2.6 8), +BVTP 4-252-014-01 WINDOW (FL) (FLX5D) 4-252-010-01 PANEL, FRONT 4-252-014-11 WINDOW (FL) (FLX7D) A-4750-813-A PANEL (L) BOARD, COMPLETE 4-252-011-01 PANEL (A), SIDE (EXCEPT FLX5D: TH)
  • Page 123: Dsp/gc/mc/mb/regulator Boards Section

    HCD-FLX5D/FLX7D 8-6. DSP/GC/MC/MB/REGULATOR BOARDS SECTION not supplied IC802 IC803 IC801 IC804 CDM53N-DVBU14 Q864 not supplied not supplied not supplied not supplied power transformer section (FLX7D) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-782-252-11 WIRE (FLAT TYPE) (9 CORE) (FLX7D) A-1065-322-A DSP BOARD, COMPLETE (FLX5D: EA) 1-824-686-11 WIRE (FLAT TYPE) (13 CORE) A-1065-337-A DSP BOARD, COMPLETE (FLX7D: EA)
  • Page 124: Power Tansformer Section

    HCD-FLX5D/FLX7D 8-7. POWER TANSFORMER SECTION (FLX5D: E2, E3, E15, EA, SP, MY, PH/ FLX7D) F913 T911 F919 F918 F916 F915 F914 F917 CENTER SW AMP/FRONT REAR AMP boards section The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
  • Page 125: Center Sw Amp/front Rear Amp Boards Section

    HCD-FLX5D/FLX7D 8-8. CENTER SW AMP/FRONT REAR AMP BOARDS SECTION not supplied not supplied not supplied IC921 IC922 supplied SP RELAY board section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-970-608-01 SUMITITE (B3), +BV A-4730-385-A FRONT REAR AMP BOARD, COMPLETE A-1058-400-A CENTER SW AMP BOARD, COMPLETE (EXCEPT FLX5D: KR, TH) (EXCEPT FLX5D: KR, TH)
  • Page 126: Sp Relay Board Section

    HCD-FLX5D/FLX7D 8-9. SP RELAY BOARD SECTION not supplied M801 not supplied The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref. No. Part No.
  • Page 127: Dvd Mechanism Deck Section-1

    HCD-FLX5D/FLX7D 8-10. DVD MECHANISM DECK SECTION-1 (CDM53N-DVBU14) not supplied not supplied not supplied not supplied supplied DVD mechanism deck section-3 supplied not supplied DVD mechanism deck section-2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-218-253-52 SCREW (M2.6), +BTTP 4-964-461-02 HOLDER (SENSOR) 3-341-549-01 SCREW (2.6 12) (DIA.
  • Page 128: Dvd Mechanism Deck Section-4

    HCD-FLX5D/FLX7D 8-11. DVD MECHANISM DECK SECTION-2 (CDM53N-DVBU14) M702 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-218-253-52 SCREW (M2.6), +BTTP 4-211-232-01 GEAR (LD DECELERATION) 1-683-902-11 LOADING MOTOR BOARD 4-211-228-01 LEVER (GOOSENECK) 4-211-235-01 BELT (COMMUNICATION) 4-214-130-01 GEAR (TRAY) 4-241-745-01 BELT (LOADING 1) 4-221-505-11 CHASSIS (MOLD B) 4-211-231-01 PULLEY (MODE)
  • Page 129: (cdm53n-dvbu14)

    HCD-FLX5D/FLX7D 8-12. DVD MECHANISM DECK SECTION-3 (CDM53N-DVBU14) not supplied DVD mechanism deck section-4 not supplied base unit section (DVBU14) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-985-672-01 SCREW (+PTPWH M2.6), FLOATING 4-933-134-01 SCREW (+PTPWH M2.6 6) 4-211-234-01 BRACKET (STOCKER T) 4-221-504-01 BASE (STOCKER), FITTING 4-239-789-01 TRAY (DBU-1)
  • Page 130: (cdm53n-dvbu14)

    HCD-FLX5D/FLX7D 8-13. DVD MECHANISM DECK SECTION-4 (CDM53N-DVBU14) not supplied S707 not supplied M701 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-218-253-52 SCREW (M2.6), +BTTP 4-211-242-11 SHAFT (SELECTION GEAR) 1-683-901-11 CLAMP MOTOR BOARD 4-211-241-01 LEVER (SELECTION) 4-211-215-01 GEAR (EJECT) 4-211-216-01 GEAR (RELAY) 4-211-232-01 GEAR (MODE DECELERATION)
  • Page 131: Base Unit Section (dvbu14)

    HCD-FLX5D/FLX7D 8-14. BASE UNIT SECTION (DVBU14) The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-981-923-01 SCREW (M), STEP A-4728-690-A RF BOARD, COMPLETE 3-053-847-31 INSULATOR...
  • Page 132: Electrical Parts List

    HCD-FLX5D/FXL7D SECTION 9 BLUE LED ELECTRICAL PARTS LIST CD DOOR CD DOOR SW1 CD DOOR SW2 CD MOTOR NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by parts list may be different from the parts speci- are seldom required for routine service.
  • Page 133 HCD-FLX5D/FXL7D CD MOTOR CENTER SW AMP CLAMP MOTOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > < RESISTOR > IC501 8-749-017-16 IC STK442-130M R315 1-216-805-11 METAL CHIP 1/10W R316 1-216-827-11 METAL CHIP 3.3K 1/10W <...
  • Page 134 HCD-FLX5D/FXL7D CLAMP MOTOR CONNECT Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > C621 1-164-360-11 CERAMIC CHIP 0.1uF C622 1-164-360-11 CERAMIC CHIP 0.1uF CN712 1-506-469-11 PIN, CONNECTOR 4P (FLX7D) < DIODE > C623 1-126-934-11 ELECT 220uF C633 1-164-360-11 CERAMIC CHIP...
  • Page 135 HCD-FLX5D/FXL7D Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D742 8-719-988-61 DIODE 1SS355TE-17 C721 1-136-497-81 FILM 0.1uF C722 1-136-497-81 FILM 0.1uF < EARTH TERMINAL > C723 1-126-964-11 ELECT 10uF C725 1-126-964-11 ELECT 10uF EP601 1-537-738-21 TERMINAL, GROUND C726 1-126-964-11 ELECT 10uF...
  • Page 136 HCD-FLX5D/FXL7D Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JR651 1-216-864-11 SHORT CHIP R611 1-216-809-11 METAL CHIP 1/10W JR652 1-216-864-11 SHORT CHIP 0 (FLX5D) R612 1-216-809-11 METAL CHIP 1/10W JR653 1-216-864-11 SHORT CHIP 0 (FLX5D) R613 1-216-809-11 METAL CHIP 1/10W JR654...
  • Page 137 HCD-FLX5D/FXL7D FRONT REAR AMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R753 1-216-821-11 METAL CHIP 1/10W R683 1-216-809-11 METAL CHIP 1/10W (FLX7D) R754 1-216-845-11 METAL CHIP 100K 1/10W R684 1-216-809-11 METAL CHIP 1/10W R755 1-216-821-11 METAL CHIP 1/10W (FLX7D) R757...
  • Page 138 HCD-FLX5D/FXL7D FRONT REAR AMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C421 1-126-967-11 ELECT 47uF Q471 8-729-119-76 TRANSISTOR 2SA1175-HFE Q472 8-729-119-78 TRANSISTOR 2SC2785-HFE C422 1-126-967-11 ELECT 47uF C431 1-126-964-11 ELECT 10uF Q481 8-729-119-78 TRANSISTOR 2SC2785-HFE C432 1-162-290-31 CERAMIC 470PF...
  • Page 139 HCD-FLX5D/FXL7D FRONT REAR AMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R481 1-247-831-91 CARBON 1/4W C294 1-164-362-11 CERAMIC CHIP 470PF R482 1-247-871-91 CARBON 1/4W C295 1-164-362-11 CERAMIC CHIP 470PF R483 1-249-415-11 CARBON 1/4W C296 1-164-362-11 CERAMIC CHIP 470PF R484 1-247-871-91 CARBON...
  • Page 140 HCD-FLX5D/FXL7D IN/MIDIN SW INIT/COUNT SW Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q204 8-729-119-78 TRANSISTOR 2SC2785-HFE R257 1-216-809-11 METAL CHIP 1/10W Q205 8-729-119-78 TRANSISTOR 2SC2785-HFE R258 1-216-809-11 METAL CHIP 1/10W R259 1-216-809-11 METAL CHIP 1/10W Q206 8-729-119-78 TRANSISTOR 2SC2785-HFE...
  • Page 141 HCD-FLX5D/FXL7D LOADING MOTOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-683-902-11 LOADING MOTOR BOARD C242 1-164-947-11 CERAMIC CHIP 0.01uF ********************* C243 1-164-947-11 CERAMIC CHIP 0.01uF < CAPACITOR > C244 1-164-947-11 CERAMIC CHIP 0.01uF C245 1-164-947-11 CERAMIC CHIP 0.01uF C703 1-162-306-11 CERAMIC...
  • Page 142 HCD-FLX5D/FXL7D Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C506 1-164-934-11 CERAMIC CHIP 330PF C716 1-125-891-11 CERAMIC CHIP 0.47uF C508 1-164-937-11 CERAMIC CHIP 0.001uF C717 1-164-943-11 CERAMIC CHIP 0.01uF C718 1-107-820-11 CERAMIC CHIP 0.1uF C509 1-164-934-11 CERAMIC CHIP 330PF C720 1-125-777-11 CERAMIC CHIP...
  • Page 143 HCD-FLX5D/FXL7D Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C807 1-164-947-11 CERAMIC CHIP 0.01uF C865 1-164-947-11 CERAMIC CHIP 0.01uF (FLX7D) (FLX7D) C808 1-164-874-11 CERAMIC CHIP 100PF C866 1-164-947-11 CERAMIC CHIP 0.01uF (FLX7D) (FLX7D) C809 1-117-370-11 CERAMIC CHIP 10uF (FLX7D) C867...
  • Page 144 HCD-FLX5D/FXL7D Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FL701 1-234-177-21 FILTER, CHIP EMI Q903 8-729-025-28 FET 2SK1828 FL702 1-234-177-21 FILTER, CHIP EMI Q904 8-729-025-28 FET 2SK1828 FL703 1-234-177-21 FILTER, CHIP EMI < RESISTOR > FL704 1-234-177-21 FILTER, CHIP EMI FL705 1-234-177-21 FILTER, CHIP EMI...
  • Page 145 HCD-FLX5D/FXL7D Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R273 1-216-864-11 SHORT CHIP R434 1-218-990-11 SHORT CHIP 0 (FLX7D) R435 1-218-990-11 SHORT CHIP 0 (FLX7D) R274 1-216-864-11 SHORT CHIP R275 1-216-864-11 SHORT CHIP R436 1-218-933-11 RES-CHIP 1/16W R276 1-216-864-11 SHORT CHIP...
  • Page 146 HCD-FLX5D/FXL7D Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R720 1-218-953-11 RES-CHIP 1/16W R584 1-218-971-11 RES-CHIP 1/16W R721 1-218-971-11 RES-CHIP 1/16W R585 1-218-990-11 SHORT CHIP R724 1-218-953-11 RES-CHIP 1/16W R586 1-220-210-11 RES-CHIP 200K 1/16W R587 1-218-990-11 SHORT CHIP R725 1-218-956-11 RES-CHIP 1.8K...
  • Page 147 HCD-FLX5D/FXL7D Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R822 1-218-933-11 RES-CHIP 1/16W R885 1-218-965-11 RES-CHIP 1/16W (FLX7D) (FLX7D) R823 1-218-933-11 RES-CHIP 1/16W R886 1-218-965-11 RES-CHIP 1/16W (FLX7D) (FLX7D) R824 1-218-990-11 SHORT CHIP R887 1-218-965-11 RES-CHIP 1/16W R826 1-218-933-11 RES-CHIP...
  • Page 148 HCD-FLX5D/FXL7D Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R963 1-218-965-11 RES-CHIP 1/16W C254 1-162-968-11 CERAMIC CHIP 0.0047uF 10% (FLX7D) R964 1-218-965-11 RES-CHIP 1/16W < CONNECTOR > (FLX5D) R970 1-218-990-11 SHORT CHIP CN101 1-774-744-21 CONNECTOR, BOARD TO BOARD 18P R971 1-218-990-11 SHORT CHIP CN102...
  • Page 149 HCD-FLX5D/FXL7D Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q256 8-729-140-04 TRANSISTOR 2SB1116A-L R175 1-216-809-11 METAL CHIP 1/10W Q257 8-729-116-02 TRANSISTOR BA1A4M-TP R176 1-216-809-11 METAL CHIP 1/10W < RESISTOR > R177 1-216-809-11 METAL CHIP 1/10W R178 1-216-809-11 METAL CHIP 1/10W R101...
  • Page 150 HCD-FLX5D/FXL7D OUT/MIDOUT SW Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R262 1-216-841-11 METAL CHIP 1/10W < IC > R263 1-216-841-11 METAL CHIP 1/10W IC351 8-759-711-85 IC NJM4580E-D R264 1-216-841-11 METAL CHIP 1/10W IC352 8-759-496-41 IC M65850FP-E1 R265 1-216-821-11 METAL CHIP 1/10W...
  • Page 151 HCD-FLX5D/FXL7D PANEL (L) PANEL (R) PANEL (U) REGULATOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4750-813-A PANEL (L) BOARD, COMPLETE PANEL (U) BOARD (EXCEPT FLX5D: TH) *************** A-4753-580-A PANEL (L) BOARD, COMPLETE (FLX5D: TH) < CAPACITOR > ************************* <...
  • Page 152 HCD-FLX5D/FXL7D SENSOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C006 1-128-993-21 ELECT CHIP 22uF < TRANSISTOR > C008 1-107-826-11 CERAMIC CHIP 0.1uF C009 1-107-826-11 CERAMIC CHIP 0.1uF Q001 8-729-903-46 TRANSISTOR 2SB1132-P C010 1-115-416-11 CERAMIC CHIP 0.001uF Q002 8-729-903-46 TRANSISTOR...
  • Page 153 HCD-FLX5D/FXL7D SENSOR 2 SIRCS SP RELAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-683-900-11 SENSOR 2 BOARD 1-126-961-11 ELECT 2.2uF 1-137-150-11 FILM 0.01uF 100V *************** 1-126-960-11 ELECT 4-964-461-02 HOLDER (SENSOR) 1-126-960-11 ELECT < PHOTO TRANSISTOR > 1-126-960-11 ELECT 1-126-935-11 ELECT 470uF...
  • Page 154 HCD-FLX5D/FXL7D SP RELAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > < TRANSISTOR > * CN601 1-564-719-11 PIN, CONNECTOR (SMALL TYPE) 3P 8-729-801-93 TRANSISTOR 2SD1387-3 * CN602 1-564-724-11 PIN, CONNECTOR (SMALL TYPE) 8P 8-729-116-02 TRANSISTOR BA1A4M-TP CN801...
  • Page 155 HCD-FLX5D/FXL7D SP RELAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-216-836-11 METAL CHIP 1/10W 0 R29 1-219-787-17 FUSIBLE 1/4W F R851 1-216-829-11 METAL CHIP 4.7K 1/10W 0 R30 1-219-787-17 FUSIBLE 1/4W F R852 1-216-825-11 METAL CHIP 2.2K 1/10W R853...
  • Page 156 HCD-FLX5D/FXL7D SUB TRANS TC DOOR TC DOOR SW TRANS VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4730-194-A SUB TRANS BOARD, COMPLETE (FLX5D: KR) 1-861-346-11 TC DOOR BOARD A-4730-199-A SUB TRANS BOARD, COMPLETE ************* (FLX5D: E2, E3, E15, EA, SP, MY, PH/FLX7D) A-4730-206-A SUB TRANS BOARD, COMPLETE (FLX5D: AUS) <...
  • Page 157 HCD-FLX5D/FXL7D VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark MISCELLANEOUS C742 1-104-655-91 ELECT 470uF 6.3V ************** C743 1-126-965-11 ELECT 22uF C744 1-104-655-91 ELECT 470uF 6.3V 1-773-044-11 WIRE (FLAT TYPE) (17 CORE) C745 1-126-965-11 ELECT 22uF 1-796-910-11 DECK, MECHANICAL (CASSETTE) C746 1-104-655-91 ELECT...
  • Page 158 HCD-FLX5D/FXL7D Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark ACCESSORIES ************ 1-569-007-11 ADAPTOR, CONVERSION 2P (FLX5D: E3, E15/FLX7D: E15) 1-569-008-22 ADAPTOR, CONVERSION 2P (FLX5D: SP, MY, PH) The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
  • Page 159 HCD-FLX5D/FXL7D MEMO...
  • Page 160: Revision History

    HCD-FLX5D/FLX7D REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2004.04...

This manual is also suitable for:

Hcd-flx5d

Comments to this Manuals

Symbols: 0
Latest comments: