Sony CTE-A10 Operating Instructions Manual page 27

Notes on connections
• For a) in the diagram:
This connection is to be made to power cascaded CTE-600s on and off
simultaneously with the power on and off of the Sony video conference
system (PCS series) connected to this system. Use the audio connecting
cable (supplied with the CTE-600) for this connection. In this case, be sure
to connect the input and output connectors correctly.
Audio connecting cable (supplied with the CTE-600)
AUDIO IN
AUDIO OUT
Use either one of the above pairs. You can also use cable
in the pair separately.
Pair of audio connecting
cables to be used
Pair of AUDIO IN
and LINE OUT
Pair of AUDIO OUT
and LINE IN
• For b) in the diagram
The insertion direction of the input/output connector of the CTE-A10 is
upside down, compared with that of the CTE-600. Be aware of the
direction of the v mark on the connecting cable when inserting it into the
input/output connector.
CTE-600
v mark
They are paired.
They are paired.
VIDEO output connector
(video conference system
side)
Connect the LINE OUT
side.
Connect the AUDIO OUT
side.
LINE OUT
LINE IN
PCS VIDEO IN (the CTE-A10
side)
Connect the AUDIO IN
side.
Connect the LINE IN side.
CTE-A10
v mark
Configurations
9
GB