Lcd Display - Emerson Rosemount 3144P Reference Manual

Reference Manual
00809-0100-4021, Rev EA
March 2007

LCD Display

NOTE
The bar graph is not used for F
"Sensor 1, Differential, Sensor 2, Multidrop, or Bust Mode" annunciators."
Table 4-14. LCD Display Error Warning Descriptions
Message
RB.DETAILED_STATUS
Sensor Transducer Block Error
Manufacturing Block Integrity Error
Hardware/Software Incompatible
Non-volatile Memory Integrity Error
ROM Integrity Error
Lost Deferred NV Data
NV Writes Deferred
ADB Transducer Block Error
STB.SENSR_DETAILED_STATUS
Invalid Configuration
ASIC RCV Error
ASIC TX Error
ASIC Interrupt Error
Reference Error
ASIC Configuration Error
Sensor 1 Open
Sensor 1 Shorted
Terminal Temperature Failure
Sensor 1 Out of Operating Range
Sensor 1 Beyond Operating Limits
Terminal Temperature Out of Operating Range
Terminal Temperature Beyond Operating Limits
Sensor 1 Degraded
Calibration Error
Sensor 2 Open
Sensor 2 Shorted
Sensor 2 Out of Operating Range
Sensor 2 Beyond Operating Limits
Sensor 2 Degraded
Sensor Drift Alarm
Hot Backup Active
The following are the default tags for each of the possible Function blocks
which display data on the LCD
Block Name
Transducer
AI 1400
AI 1500
AI 1600
PID 1700
PID 1800
ISEL 1900
CHAR 2000
ARITH 2100
OSPL 2200
Rosemount 3144P
fieldbus devices, nor are the
OUNDATION
LCD top line
"Error"
"Error"
"Error"
"Error"
"Error"
"Error"
No Errors Displayed
No Errors Displayed
"Error"
"Error"
"Error"
"Error"
"Error"
"Error"
"Error"
"Error"
"Error"
No Errors Displayed
"Error"
No Errors Displayed
"Error"
"Error"
"Error"
"Error"
"Error"
No Errors Displayed
"Error"
"Error"
"Error"
"Error"
LCD bottom line
LCD bottom line
"DVICE"
"DVICE"
"DVICE"
"DVICE"
"DVICE"
"DVICE"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"SNSOR"
"TRANS"
"AI 14"
"AI 15"
"AI 16"
"PID 1"
"PID 1"
"ISEL"
"CHAR"
"ARITH"
"OSPL"
4-29