Procedure 4. Use The Record & Snapshot Features (Optional) - Verathon GLIDESCOPE TITANIUM Operation & Maintenance Manual

PROCEDURE 4.
WARNING
Use only a passive-type USB flash drive. Do not use USB drives powered by another
external source.
The system is equipped with video and audio recording features and the ability to save a snapshot of the live
display on the monitor. The system saves this data to a USB flash drive, and you can view the recordings or
snapshots on the video monitor or a computer.
By default, audio recording is disabled. If you would like the system to record audio in addition to video,
complete the procedure
Audio Recording setting to On.
While recording, a number next to the icon indicates approximately what percentage of the USB flash drive
has been used. When the USB flash drive is full, recording stops.
1. On the back of the monitor, remove the USB port cap, and then insert a USB flash drive into the port.
Note: If you do not insert a USB flash drive, the video recording, audio recording, and snapshot features
will not be available.
2. Ensure that the USB flash drive is detected by checking if the USB Flash Drive icon
the screen is displayed.
3. If you want to record the intubation, press the Record button
the USB flash drive.
If audio recording is enabled in the User Settings display, the Audio Recording is Active icon
appear on the screen, and audio will be recorded with the video.
4. When you are finished recording, press the Record button
icon to disappear.
Note: If you remove the USB flash drive before the Saving File icon disappears, the recording will be lost.
Operations & Maintenance Manual: Using the Device
USE THE RECORD & SNAPSHOT FEATURES (OPTIONAL)
Configure User Settings to enter the User Settings screen, and then change the
USB port
. Video recording starts and is saved to
again, and then wait for the Saving File
on the bottom of
will
29