Removing The Transportation Safety Bolts ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙63; Removing The Transportation Safety Bolts - Vatech Pax-i PCH-2500 Installation Manual

4.4 Removing the Transportation Safety Bolts

PaX-i (PCH-2500) Installation Manual
4 Installing the Equipment: Floor Standing (Optional)
1. Remove the semi-clear tape on both sides and
open the top cover.
Be careful not to scratch the cover.
2. Remove the two safety bolts and the tags as
shown in the figure.
Allen
6 mm/0.23"
wrench
63