Completing Miscellaneous Works; Connecting The Cables To The Equipment ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙96; Connecting The Cables To The Equipment - Vatech Pax-i PCH-2500 Installation Manual

6 Completing Miscellaneous Works

6.1 Connecting the Cables to the Equipment

A. The LVDS cable in use
Connector layout
Scan type
96
Rear
Front
OS type
1. Insert the cables through the opening from
the back. Then pull them out from the front
side.
2. Connect the RS-232 cable (Part No.25).
PaX-i (PCH-2500) Installation Manual