Safety Information - Vatech A9 Technical Manual

Safety Information

X-rays can be dangerous if not used properly, followed by safety instructions. All safety instructions
and warnings must be carefully observed to guarantee the maximum protection of technicians from
X-Ray hazards. To operate and service the device, follow the instructions contained in this manual.
VDH-TeM-098
Operator Qualifications
This equipment can only be operated or serviced by VATECH authorized
engineers who are fully trained. To operate this equipment, all operators
must:
• have read and understood the Technical manual before application.
• be familiar with the fundamental structures and functions of the
equipment with enough experience.
• Only VATECH authorized operator can handle the electrical circuit
board, and an understanding of the electric and electrical system is
required.
• Be able to recognize operation malfunction and implement
appropriate measures to take care of irregularities.
General Safety Precautions
• To operate and service the device, following instructions, Note,
Important, Caution, and Warning must be carefully
• Do not place any objects within the equipment operational
boundary. It can physically damage equipment.
• Ensure that this medical equipment is kept away from water,
moisture, or foreign substances at all times.
• The sudden change of temperature may affect equipment operation
conditions by causing condensation. Wait until the equipment
reaches room temperature then turn it on.
• This product may only be operated with VATECH original
accessories or third-party accessories only approved by VATECH
Co., Ltd.
9 / 214
Vatech A9 (PHT-30CSS)
Technical manual
COPYRIGHT© 2020 VATECH
.
ALL RIGHTS RESERVED