Safety Instructions - Vatech EzSensor Classic Installation & User Manual

1.3

Safety Instructions

EzSensor Classic, an Intra-oral Imaging device, is intended to collect dental x-ray
photons and convert them into electronic impulses that may be stored, viewed, and
manipulated for diagnostic use by dentists.
Before each usage, check the outer surface of the EzSensor Classic for any signs of physical
damage or defect. The surface of the EzSensor Classic should have a smooth finish, with no
evidence of chipping or damage. Otherwise, contact your local Product distributor for further
instructions on how to proceed.
To ensure the correct usage of the EzSensor Classic device in a clinical environment, for which
the intended purposes correspond to its design and application, only dentists or their designated
operators are authorized to operate this Product
Modifications
MANUFACTURER or by parties expressly authorized to do so by MANUFACTURER. Any
modifications or additions must always comply with the standards and generally recognized
rules of good workmanship.
It is the user's responsibility to ensure compliance with all local safety regulations in effect in the
jurisdiction of installation.
Indications for Use
and/or additions to the device must be
3
conducted exclusively by