Schwank novoSchwank D 20S U Technical Manual page 14

novoSchwank shape U
Exhaust pipe collecting system [herringbone] with central fan
System F approved according to EN 777 and DIN EN 416
Exhaust pipe collecting system consists of
following main components:
 Tube heater novoSchwank
 Spiral duct and connection elements for
exhaust collecting system [different
dimensions]
 Central low-pressure fan
 Fan monitoring kit
Article no. 700 0012 0
Damper behind heater
Fig. 11: Installation exhaust collecting system with central fan, system F [principle scheme]
14
Central fan
Connecting pipe
Planning and calculation of the
complete system including collecting
pipes, fans and chimneys
must only be done by Schwank.
Planning details have to be strictly
adhered to during mounting and
assembly. Commissioning of the system
should be carried out by Schwank.
Exhaust gas
Control point chimney
sweeper
Damper in front of central
fan
Collecting exhaust pipe
Tube heater
i