Obtaining A First Image - Zeiss Crossbeam 550L Instruction Manual

6 Operation | 6.2 Obtaining a First Image
Shortcut
<CTRL + O>
<CTRL + P>
<CTRL + S>
<CTRL + ALT + S>
<CTRL + SHIFT +
S>
<CTRL + T>
<CTRL + V>
Keypad <+>
Keypad <->
ARROW Keys
Image Buffer keys
<SHIFT> and dou-
ble click

6.2 Obtaining a First Image

Info
Mobile phones in the microscope room can cause image quality infringements and in worst
case workflow interruptions.
Purpose This section describes basic procedures to obtain an image using the SE detector. To simplify the
procedure, the description uses the Crossbeam SEM Control panel and status bar functions in the
SmartSEM software.
Overview The procedure contains the following steps:
§
§
§
§
§
§
§
§
68
Function
Calls the Import TIFF dialog
Performs the Print Image function
Calls the Export TIFF dialog to save the image
Performs Auto Astigmatism Correction
Performs Auto Astigmatism Correction with Auto Focus
Calls Text Annotation
Displays the Vacuum status information
Faster Scan
Slower Scan
See Use of ARROW Keys
See Image Buffer
Performs Centre Point function
Preparing the Specimen Holder [
Loading the Specimen Chamber [
}
Locating the Specimen [
}
Switching on the Gun [ 73]
}
Switching on the EHT [ 74]
}
Acquiring an Image [ 74]
}
Optimizing the Image [ 76]
}
Saving the Image [ 78]
Instruction Manual ZEISS Crossbeam 550L, Crossbeam 550 | en-US | Rev. 3 | 349500-8122-000
}
69]
}
70]
72]
ZEISS