Attachment Of Intermediate Tube For Image Projection - Zeiss Axiotech Operating Manual

Carl Zeiss
Fig. 2-7 Attachment of intermediate tube
for image projection
• Attach binocular phototube or other tubes to the intermediate tube and tighten hexagonal screw
(2-7/5) using the SW 3 ball-headed screwdriver(2-7/8).
For further information on the intermediate tube for image projection please see the relevant
operating manual B 40-038 from Carl Zeiss.
2-6
2.4.2 Attachment of intermediate tube
for image projection
The intermediate tube for image projection
permits the projection of transparencies, crossline
micrometers and grain size image series into the
microscope image.
• Loosen hexagonal screw (2-7/12) using SW 3
ball-headed screwdriver (2-7/8) and remove the
binocular phototube (2-7/1).
• Use the lid of the tube lens case (459511-0000-
000) to remove the tube lens (2-7/2) from the
binocular tube and store the tube lens in the
case.
• Insert dovetail (underside) of the adapter plate
(2-7/10) into the stand port of the Axiotech and
slightly tighten clamping screw (2-7/12).
• Insert
fixation
countersunk hole of the adapter plate and
screw it into the drilled hole (2-7/11) on the
stand.
• Tighten clamping screw (2-7/12) and fixation
screw (2-7/9) using
screwdriver (2-7/8).
• Remove dust caps (2-7/4 and 6), attach
intermediate tube for image projection (2-7/3),
align it and screw it to the adapter plate with
the hexagonal screw (2-7/7).
Axiotech and Axiotech
screw (2-7/9) into
SW 3 ball-headed
B 40-020 e 06/99
vario
the