Servicing; Transport And Storage - Wolf Garten GS 10 eM Manual

Servicing

Removing the operating arm with permanently
installed power pack F
Switch the device off.
Î
Press the locking button [A] on the operating
Î
arm 1 .
Pull the operating arm fully out of the locator of
Î
the grass shears unit [B] 2 .
Servicing
Risk of injuries or material damage.
¾ Only clean or service the device when
the motor and the cutting tool are both
stationary.
¾ Before any work on the device, remove
the operating arm with the permanently
installed power pack beforehand.
¾ Do not clean the device with water.
¾ Repair and service work as well as the
replacement of safety elements must
be performed by a qualified expert or
workshop.
¾ Wear safety gloves before any work on
the cutting blade.
Cleaning
Switch the device off and wait until the cutting tool
Î
comes to a standstill before removing the oper-
ating arm.
Clean the grass shears after every use, especially
Î
the ventilation slots, using a dry cloth or, in the
event of heavy soiling, a brush.
Carefully clean the cutting blade after each use.
Î
After use, spray the cutting blade with conditioning
Î
oil to ensure a long service life for the grass
shears. Where possible, use an environmental-
ly-friendly lubricant.
Do not oil the grass shears during use.
Î
To oil the grass shears, place them on their side
Î
and apply a thin oil film to the cutting blade.
WARNING!

Transport and storage

Risk of injuries due to the cutting tool.
¾ Before transport or storage, switch off
the device and wait until the cutting tool
comes to a standstill.
¾ Remove the operating arm before trans-
port or storage.
¾ Always fit the protective cover before
transport and storage.
Transport
Secure the device sufficiently to prevent its unin-
Î
tentional slipping if you are transporting it on or in
a vehicle.
Storage
Clean your device thoroughly at the end of every
Î
season.
Always store the device in a dry and safe location
Î
that is inaccessible to children.
Store the operating arm and grass shears sepa-
Î
rately.
Store the operating arm in a cool and dry loca-
Î
tion. Recommended storage temperature ap-
prox. 0 - 23°C.
Keep the grass shears and especially their plastic
Î
components away from brake fluid, petrol, mineral
oil containing products, penetrating oils etc. They
contain chemical substances that can damage,
attack or destroy the plastic components of the
grass shears.
Fertilizers and other garden chemicals contain
Î
substances that may have a highly corrosive
effect on the metal parts of the grass shears.
Therefore do not store your grass shears in the
vicinity of these substances.
WARNING!
EN
23