Table of Contents
Advertisement
Figure 9. Rear panel I/O
Table 4. Rear panel I/O legend
Letter
Description
A
Configurable COM ports (RS232/422/485)
Figure 11. Side panel I/O
Table 6. Side panel I/O legend
Letter
Description
A
USIM slot 1
Power button
The power button is a non-latched push button with a blue LED indicator. The system is turned on when the button is pressed,
and the power LED is illuminated. If the system hangs, press the button for five seconds to turn off the system.
DisplayPort connectors
Two DisplayPort connectors on the front panel can connect to VGA, DVI, HDMI, and DisplayPort monitors using a DisplayPort to
VGA adapter cable, DisplayPort to DVI adapter cable, or DisplayPort to HDMI adapter cable and DisplayPort cable.
Figure 12. DisplayPort connector pin locations
14
System Layout
Letter
Description
B
Removable panel for expansion module I/O
Letter
Description
B
USIM slot 2
Advertisement
Table of Contents
